DOVape Atomizer Review
VGOD small vape devices sparked the global popularity of nicotine salt e-liquid. Besides refillable small vape devices, for enthusiasts, finding a DIY atomizer suitable for nicotine salt e-liquid has become a key focus. The product we are sharing today ma
The VGOD pod has sparked a global trend for nicotine salt e-liquids. Besides refillable pods, players are keen on finding a suitable DIY atomizer for nicotine salt e-liquids. Today, I want to share a product that might be the best atomizer for nicotine salt e-liquids currently available — the DO Cold Smoke 2 Atomizer. Why do I say this? Let's break it down.
This atomizer is familiar to those who know the author's work, as it previously released the DO Cold Smoke Atomizer, and this is its second generation. The packaging has changed to a side-pull box with an orange-yellow background. Although packaging isn't the main focus of the product, it does give a somewhat "high-end" feel.
The base diameter of this atomizer remains at 22mm, and its length has increased to 56mm compared to the first generation. However, when paired with various box mods, the integrated PEI top cap and PEI e-liquid chamber are favored by many players, so there is no sense of mismatch.
Since it is called a cold smoke atomizer, the top cap is where the magic lies. After removing the PEI baffle, you can see that the bottom of the central column has three airflow holes. The vapor produced during atomization is directed through these three holes, and then fully cooled through the space between the integrated drip tip and the top cap.
Most atomizers on the market, whether for dripping, tank systems, or pre-filled products, are designed for direct inhalation of vapor. Therefore, regardless of whether high-resistance or low-resistance coils are used, or if the airflow is mismatched, the vapor entering the mouth will always have residual heat. The cold smoke atomizer provides a sensation of vapor without warmth, which is indeed refreshing when using such an atomizer for the first time.
As for condensation, there is no need to worry about inhaling anything during regular use, but there may be some residue in the space between the drip tip and the top cap, so remember to unscrew the drip tip for cleaning.
The other top cap included in the accessories is a standard straight-through design, but you will need to provide your own drip tip.
The e-liquid chamber has a capacity of 4ml, which is sufficient for a full day of use with nicotine salt e-liquids.
The electrode deck features a slanted symmetrical structure. In the image above, the upper left and lower right are open wire locking methods, while the upper right and lower left are traditional screw locking methods. This mixed design undoubtedly supports various data and different types of coils. The central airflow hole clearly indicates that it is designed for mouth-to-lung (MTL) vaping. If you are someone who constantly talks about airflow resistance or flavor, then you might not need to continue reading, as this atomizer is not for those types of users, and 90% of tank products on the market are not suitable for them.
When installing the coil, if you are using a 0.32mm wire, it is recommended to use a cross screw post for locking, as the open wire locking is more suited for thicker wire gauges and fused claptons. Additionally, the oil channels each have two large oil holes, which means you don't have to worry about the thickness of the cotton; you can just stuff it in.
The manufacturer provides ni80 material for the standard wire and clapton wire, but ni80 wire generally diminishes flavor perception regardless of gauge, so the performance on this atomizer is naturally not optimal. However, as a mouth-to-lung setup, using clapton wire with the airflow set to "D" (fully open) will yield a flavor that is satisfying from any angle. Even compared to other tank products that focus on single-coil clapton setups, the DO Cold Smoke 2 Atomizer has clear advantages.
As for the specifications for experiencing nicotine salt e-liquids, I recommend using 0.4mm A1 wire with a 2.5mm diameter, tightly coiled 9-10 times. Why use 0.4mm wire instead of the "flavor chasers"' long-favored 0.32mm wire? This is because the atomizer is designed for mouth-to-lung vaping, combined with a larger atomization space; overly fine wire simply cannot provide enough flavor. A 0.5mm wire is also not suitable because nicotine salts often have a strong throat hit, and low resistance with high power is only tolerable for those with iron lungs, so 0.4mm wire is very suitable. The 9-10 coils are also due to the internal space and the relatively low number of coils, which allows for slower heating that better enhances the flavor of the e-liquid.
#p#分页标题#e#
Most nicotine salt e-liquids contain 35-50mg, which brings a relatively strong throat hit. Many players who used to choose 6mg regular nicotine e-liquids before the rise of nicotine salts will notice a significant difference in throat hit when switching to nicotine salts, often leading to a sore throat the next day. The reason I mentioned that this atomizer might be the best for nicotine salt e-liquids is due to its cold smoke structure.
This cold smoke structure effectively alleviates the intense throat hit, making it smoother, even with 50mg salt e-liquids, without causing a stinging sensation, which is its charm. Moreover, this cold smoke structure enhances the throat hit without diminishing flavor, and when used with nicotine salt e-liquids, it makes it easier to get a buzz. Its differentiation from the so-called "king of flavor" is also due to this cold smoke structure, allowing for deep inhales without throat irritation, thus providing an intense flavor experience. If you don't understand what I've just said, using the standard straight-through top cap in the accessories might clarify things for you.
Summary
The DO atomizer, as DOVAPE's flagship product in 2018, adopts a brand new cold smoke design. As the name suggests, the temperature of the vapor entering the mouth is significantly lower than that of traditional atomizers, and it has a large 4ml e-liquid capacity, so there is no need to worry about battery life. The chamber and drip tip (integrated top cap) and anti-condensation baffle are all made of PEI material. The semi-transparent e-liquid chamber allows for easy observation of remaining e-liquid, ensuring safety while providing good heat insulation and durability; the PEI drip tip fits perfectly in the mouth, and continuous inhalation won't burn the lips; the baffle can isolate excess condensation, ensuring that no condensation enters the mouth even after finishing two chambers of e-liquid. The bottom airflow is adjustable across six levels (D, O, V, A, P, E), ensuring that there is an airflow setting to satisfy even the most discerning taste buds.
There are indeed some minor drawbacks: the heat dissipation treatment of the metal top cap is somewhat lacking, as it becomes noticeably hot after about ten puffs. This is a compromise made for flavor, as the overall heat dissipation area or volume has been reduced, resulting in a lower heat dissipation rate than the overall heat absorption rate, leading to the top cap heating up during continuous use. However, it does not burn the mouth during use, as the integrated PEI drip tip effectively protects the lips from heat transfer.
This atomizer is familiar to those who know the author's work, as it previously released the DO Cold Smoke Atomizer, and this is its second generation. The packaging has changed to a side-pull box with an orange-yellow background. Although packaging isn't the main focus of the product, it does give a somewhat "high-end" feel.
The base diameter of this atomizer remains at 22mm, and its length has increased to 56mm compared to the first generation. However, when paired with various box mods, the integrated PEI top cap and PEI e-liquid chamber are favored by many players, so there is no sense of mismatch.
Since it is called a cold smoke atomizer, the top cap is where the magic lies. After removing the PEI baffle, you can see that the bottom of the central column has three airflow holes. The vapor produced during atomization is directed through these three holes, and then fully cooled through the space between the integrated drip tip and the top cap.
Most atomizers on the market, whether for dripping, tank systems, or pre-filled products, are designed for direct inhalation of vapor. Therefore, regardless of whether high-resistance or low-resistance coils are used, or if the airflow is mismatched, the vapor entering the mouth will always have residual heat. The cold smoke atomizer provides a sensation of vapor without warmth, which is indeed refreshing when using such an atomizer for the first time.
As for condensation, there is no need to worry about inhaling anything during regular use, but there may be some residue in the space between the drip tip and the top cap, so remember to unscrew the drip tip for cleaning.The other top cap included in the accessories is a standard straight-through design, but you will need to provide your own drip tip.
The e-liquid chamber has a capacity of 4ml, which is sufficient for a full day of use with nicotine salt e-liquids.
The electrode deck features a slanted symmetrical structure. In the image above, the upper left and lower right are open wire locking methods, while the upper right and lower left are traditional screw locking methods. This mixed design undoubtedly supports various data and different types of coils. The central airflow hole clearly indicates that it is designed for mouth-to-lung (MTL) vaping. If you are someone who constantly talks about airflow resistance or flavor, then you might not need to continue reading, as this atomizer is not for those types of users, and 90% of tank products on the market are not suitable for them.
When installing the coil, if you are using a 0.32mm wire, it is recommended to use a cross screw post for locking, as the open wire locking is more suited for thicker wire gauges and fused claptons. Additionally, the oil channels each have two large oil holes, which means you don't have to worry about the thickness of the cotton; you can just stuff it in.
The manufacturer provides ni80 material for the standard wire and clapton wire, but ni80 wire generally diminishes flavor perception regardless of gauge, so the performance on this atomizer is naturally not optimal. However, as a mouth-to-lung setup, using clapton wire with the airflow set to "D" (fully open) will yield a flavor that is satisfying from any angle. Even compared to other tank products that focus on single-coil clapton setups, the DO Cold Smoke 2 Atomizer has clear advantages.
As for the specifications for experiencing nicotine salt e-liquids, I recommend using 0.4mm A1 wire with a 2.5mm diameter, tightly coiled 9-10 times. Why use 0.4mm wire instead of the "flavor chasers"' long-favored 0.32mm wire? This is because the atomizer is designed for mouth-to-lung vaping, combined with a larger atomization space; overly fine wire simply cannot provide enough flavor. A 0.5mm wire is also not suitable because nicotine salts often have a strong throat hit, and low resistance with high power is only tolerable for those with iron lungs, so 0.4mm wire is very suitable. The 9-10 coils are also due to the internal space and the relatively low number of coils, which allows for slower heating that better enhances the flavor of the e-liquid.
#p#分页标题#e#
Most nicotine salt e-liquids contain 35-50mg, which brings a relatively strong throat hit. Many players who used to choose 6mg regular nicotine e-liquids before the rise of nicotine salts will notice a significant difference in throat hit when switching to nicotine salts, often leading to a sore throat the next day. The reason I mentioned that this atomizer might be the best for nicotine salt e-liquids is due to its cold smoke structure.This cold smoke structure effectively alleviates the intense throat hit, making it smoother, even with 50mg salt e-liquids, without causing a stinging sensation, which is its charm. Moreover, this cold smoke structure enhances the throat hit without diminishing flavor, and when used with nicotine salt e-liquids, it makes it easier to get a buzz. Its differentiation from the so-called "king of flavor" is also due to this cold smoke structure, allowing for deep inhales without throat irritation, thus providing an intense flavor experience. If you don't understand what I've just said, using the standard straight-through top cap in the accessories might clarify things for you.
Summary
The DO atomizer, as DOVAPE's flagship product in 2018, adopts a brand new cold smoke design. As the name suggests, the temperature of the vapor entering the mouth is significantly lower than that of traditional atomizers, and it has a large 4ml e-liquid capacity, so there is no need to worry about battery life. The chamber and drip tip (integrated top cap) and anti-condensation baffle are all made of PEI material. The semi-transparent e-liquid chamber allows for easy observation of remaining e-liquid, ensuring safety while providing good heat insulation and durability; the PEI drip tip fits perfectly in the mouth, and continuous inhalation won't burn the lips; the baffle can isolate excess condensation, ensuring that no condensation enters the mouth even after finishing two chambers of e-liquid. The bottom airflow is adjustable across six levels (D, O, V, A, P, E), ensuring that there is an airflow setting to satisfy even the most discerning taste buds.
There are indeed some minor drawbacks: the heat dissipation treatment of the metal top cap is somewhat lacking, as it becomes noticeably hot after about ten puffs. This is a compromise made for flavor, as the overall heat dissipation area or volume has been reduced, resulting in a lower heat dissipation rate than the overall heat absorption rate, leading to the top cap heating up during continuous use. However, it does not burn the mouth during use, as the integrated PEI drip tip effectively protects the lips from heat transfer.
