‘Cloud Monster’ KD-GOON 528 RDA review: a high-vapor vaping device
First of all, let's say that its packaging is a brocade bag,(to put it bluntly, it's a flannel bag, with the word "dig"), the model number is clarified, and aCUSTOM VAPES(Translation: Custom franchises)
?
There is only one atomizer body and one510Suction nozzle (Generally, authentic products will not give anything. They may be given to you because of emotion. If they have it, it would be funny)specification is24mm, the main material is made of stainless steel, and the chunky shape is the current mainstream design. The surface is smooth and the workmanship details are in place, and no flaws have been found. The suction nozzle is made of black plastic.
The atomizer body is divided into four parts, from left to right510The suction nozzle, the top cover of the atomization chamber, the casing of the atomization chamber, and the base of the electrode table. The workmanship of the disassembled parts is in place, and the details are well controlled.
The suction nozzle uses a medium caliber810Although the nozzle is the dominant taste of a medium caliber, the amount of smoke will not be small (if you feel that the caliber is too small, you can change it to a larger one)

#p#Pagination Title #e#
The atomizing top cover is made of stainless steel, and the atomizer model is engraved on the periphery of the top. The overall appearance is clear and clear. The suction nozzle adopts a single rubber ring fixed interface, and the bottom is a three-sided nine-hole air intake, which is used for rotating adjustment of air intake. There is a single ring on the air hole to facilitate fixing the bin. The interior of the top cover is clearly layered and does not gather togethersmoke oilsleek design
The front of the atomizing bin sleeve is engraved528LOGO, but the carving is not deep528The words are so small that only the shape of a parachute can be seen. They are stainless steel primary colors and do not have any auxiliary colors. They may not be visible under insufficient light or backlight conditions.LOGO, both sides of the bin sleeve are two-sided six-hole air intake, corresponding to the base heating wire, and the air intake is adjusted by rotating the top cover.
The base of the electrode table is a bit special. It adopts the double-column splint wire pressing design concept, which makes wire pressing more convenient and will not cause wire breakage during the wire pressing process. The special wire pressing method presses all kinds of wires. It's not a problem. The Phillips screwdriver is used to install the coil. Although it is not easy to use at all, it is much easier to use than the inner hexagon. grooveNo traces of lathe processing were found, and the workmanship is still very good. The oil groove has a large depth and can store a large amount of flowers. In other words, more tobacco oil can be stored. I give a good comment on this. You no longer have to worry about tobacco oil. Just take a few puffs and you will be dripping again.


510The positive pole of the interface atomizer is made of red copper, and the positive pole protrudes obviously. There is insulating material to protect the positive and negative electrodes from being contacted, which greatly prevents the short circuit caused by the contact between the positive and negative electrodes. The negative pole is fixed with bottom screws. Screws such as this must be tightened and must not be loosened at all, otherwise there will be the possibility of oil leakage or jumping short circuit. There are the code and model of the atomizer at the bottom of the base, and there are two rubber rings on the edge, which can be well locked with the bin sleeve.
#p#Pagination Title #e#
This atomizer consumes average oil, is not obvious in frying oil, has a strong taste, has a lot of smoke, and the taste is quite clear. The splint is very good for pressing the wire. It is convenient, simple and fancy wire can be used, and it can be easily processed. Various wires, such as Cantel and Clapton Heating Wire, can be easily processed. The advantage of splint pressing the wire is that no matter how hard you use, there is no possibility of breaking the wire. Of course, if you use too hard and the screw slips the wire, it will be different.

summary:The smoke is large, the smoking is smooth, and the silk making is convenient and simple. The tobacco oil is restored well, but the taste will be a little empty. The price is not expensive, it is easier to toss, and the selectivity is high. Even if you take a few big mouthfuls, the heat will not be obvious. Whether it is an old player orDIYNewbies can get the satisfaction of smoke from this atomizer.
? ?? ?I am a young tailor who evaluates various boxes, poles, atomizers and tobacco oils. I look forward to our next meeting. Smoke is waiting for you in the wind and rain.,Time is never old, we will not end!



