SLYEEK Vaping Device Specifications and Parameters

SLYEEK?

1000mA battery capacity, extra-long battery life, full power output, smooth and refined taste

1. When powered on, all battery LED indicators gradually light up and fade out once, then the device immediately enters sleep mode if not used.

2. The current battery indicator gradually lights up and the MOS tube outputs power; when not in use, the LED gradually fades out and the MOS stops output.

Current battery indicator: when battery level is 1%-20%, the red light stays on; when battery level is 20%-100%, the blue light stays on;

3. If one puff exceeds 8 seconds, the atomizer stops working and the current battery light flashes 8 times.

4. If voltage below 3.3V is detected before load output, the atomizer will not work and the red LED will flash 10 times.

5. If the atomizer is short-circuited, it cannot be used, and the red LED flashes 3 times.

6. When the atomizer is detected as connected, the blue LED flashes once as a prompt.

7. When the atomizer is detected as removed, the red LED flashes once as a prompt.

8. When the atomizer has no load, there is no output; the red LED flashes once and then turns off.

9. Press the button 5 times continuously within 2 seconds to lock/unlock the button; the current battery indicator flashes 5 times and then turns off.

10. When connected to the charger, the battery LED flashes 3 times and then stays on, showing the current battery level.

When battery level is 1%-20%, the red light stays on;

When battery level is 20%-100%, the blue light stays on;