Samurai RTA – High-Appearance Dual-Coil Tank Atomizer

Packed in bright gold drums and cartons, a large head of a Japanese Warring States warrior... There are various instructions and logos at the bottom... unpacking

The interior is two-layered design with instructions, and there is anti-counterfeiting query on the instructions...

Atomizer, a pair of filament +510 turn connectors, rubber ring accessory kit (no spare screws)... Spare glass compartment, Allen wrench, a key to open the oil compartment (Ouch, nice design)... body

The atomizer is black and gold overall, and when paired with carvings, the face value is quite high...

Remove the rear base, inner compartment, glass compartment, top cover, oil compartment cover, and drip nozzle (about 710, not commonly used on the market)...

A big highlight of this atomizer design is that a key is needed to open the oil bin. See the two small grooves in the middle silver part?

Insert the key and rotate it to open the oil tank for cleaning, which is very convenient...

The silver part is an independent nut... Notice the two small grooves on both sides of the nut?# p#pagination title #e#

Insert the two bayonets of the inner bin into the small slots shown in the picture above, and then fix them with a key. It is very simple and convenient.

This design is really good. Nowadays, many atomizers will find that the oil storage tank cannot be opened when they need to be disassembled and cleaned... Locked... Various entanglements...

The base has double hair belts that lock oil and the bottom has air intake. The structure is an older one...

One disadvantage of this structure is its large size...

The design of this oil inlet hole feels so casual... When the cotton is worn, it is necessary to divide the cotton on both sides into half and place it in the oil inlet hole... This design is really... Very unfriendly... Newbie friends either leak or have poor oil conduction...

Put on silk

The atomizer delivers a pair of filaments, but I want to test its taste with monofilament...

ni80, 0.5, 3.0, 8 laps double shots...

It needs to be mentioned here that the atomizer is not very compatible with 0.5 wire, and there is a situation where the wire is unstable in the screw hole, which causes me to use too much force to slide the wire...

It's over. There are no spare screws... (Covering face manually)...

It is recommended that friends use 0.6 silk if they use monofilament...

Cotton should be careful to be fluffy and fluffy... Divide half of the fluffy cotton into the oil inlet hole. Don't stuff it too full, just divide it into half... This way, there will be no leakage of oil and the oil conduction will be very smooth... #p#Pagination Title #e#

The oil is locked. When everyone sees the red rubber ring, they will understand that the oil is locked... One point to mention here is that there is a gap in the oil hole in the inner bin, so that the smoke oil can enter the oil hole through the gap... This also shows one point... The capacity of tobacco oil is only as much as the line above the red rubber ring to the top...

The throttle is open...Add oil and add 3 droppers and it will be full... It feels like the capacity is still less than 3ml... Okay, that's all for a while, let's summarize it... 1. The overall appearance of the atomizer is very high, but unfortunately I don't have bright gold equipment to match it... 2. There are no spare screws in the accessory package... Slide silk can only find it online... 3. The design of opening the oil bin is really good and very convenient, and the oil bin will no longer be locked... 4. With an oil locking function, there will be no leakage of oil after refueling or frying of oil after refueling... 5. It is recommended that small partners who want to use monofilament use 0.6 silk, which will make it more stable... 6. The design of the oil inlet hole is not friendly. If the cotton is directly piled up, it is easy to cause too little oil leakage or too much oil conduction is poor... (You can do it my way) 7. The bottom air intake + oil lock design inevitably causes the base to be too high.While controlling the overall volume of the atomizer, the capacity of the oil reservoir is too small and feels less than 3ml. I don't need to say more about how frequently refueling is... 8. The intake air can be adjusted, and the drag resistance changes significantly. When the maximum is opened, there is basically no drag resistance. I like half of the drag resistance very much, similar to CP, so how big the smoke you want depends entirely on your data... 9. The taste, I think it's quite good and rich, but it's different from CP. Drawing the same oil gives different themes, but I like them both... 10. The drip nozzle would like to say in particular that the taste of this drip nozzle is very good, the lips feel very comfortable, and there is no condensation during use... 11. Condensation... This is a heavy topic... Inevitably... During a week of use, condensation often spills out from the air inlet hole onto the equipment, so favorite friends should always prepare paper towels... Hey hey hey... Um... After thinking about it, I think that's about it... #p#Pagination Title #e#By the way, I remembered something. The positive pole of the 510 at the bottom protrudes, which can meet the use of direct mechanical equipment. But there is a strange thing. I used the key to tighten the positive pole of the 510 according to the instructions and found that the positive pole was very loose and could be rotated all the time, but it would not be screwed out... It's amazing... However, the power on is normal, and there is no jumping even when placed on the box...