What Is the Difference Between Contact Coils and Spaced Coils?

  Do a beautiful and moderate heat generation, enough explosive power of the coil, for DIY atomizer core taste and smoke experience is quite important. Want to do a good job of atomizer diy is important to heat wire dense winding and loose winding processing above, the following to the guys detailed electronic cigarette heating wire dense winding and loose winding difference is?

This is the first time I've seen an atomizer in the world. 　　1Space

This is the first time I've ever seen a cigarette in my life. 　　The same resistance, loose winding because the gap between the heating wire than dense winding, so the lateral space occupies a larger, so the adaptability of the atomizer in general is not as dense as the winding of the heating wire to more excellent, some small space atomizer is even difficult to put down a relatively standard loose winding coil. The atomizer is not as good as a dense-wound heating wire to be more excellent. 　　2Heating speed The speed of heat generation is very high. 　　Loose-wound coils are not as efficient at transferring heat as dense-wound coils because of the gap between the heating wire. Dense-wound coils in the middle of the two rows of coils because of each other's mutual heating will lead to heating speed will be very fast, the final formation of ignition burning wire, from the inner circle outward diffusion of heat in this case. This will lead to the whole heating core under the same power, the heating speed of the dense winding will be faster than the loose winding coils, and the explosive power is stronger. Dense-wound heating speed is concentrated in the middle of the position, the power is slightly inadvertently too high, easy to burn off the cotton. Loose-wound heat is comprehensive, each turn of the heat rate is the same, the power is slightly higher, not to directly destroy the core.   　　3Production Difficulty   　　Loose-wound coils are very simple to make, you just need to casually wrap the heating wire around the wire-winding rod, and then squeeze it inward, and then stretch it, and after repeating it two or three times, there will be a more perfect loose-wound coils appear. If you don't have a wire wrapping device, it's very difficult for the average novice to wind a very tight coil with just a wire wrapping rod. Winding out the coil is likely to appear uneven gap, these uneven even there is no way to deal with even by burning the wire when the adjustment.   　　4 Resistance   　　The resistance of the heating wire in the same material specifications, only and the length of the heating wire has a relationship, loose winding and dense winding resistance gap is negligible.  ; The resistance difference between loosely wound and densely wound is negligible. 　　5Smoke The resistance of the heating wire is only related to the length of the heating wire under the same material specification. 　　Because the loose-wound coil in the same power under the heating speed is not as dense-wound coil, so the same power under the smoke outbreak speed is not as dense-wound coil. So you want to improve the amount of smoke loose-wound coils, you need to increase the power, the so-called loose-wound coils eat more power. This does not mean that the amount of smoke in this competition, loose winding coil is no way to compare with the dense winding coil, can not say & ldquo; you loose winding can improve power, I can also improve the power of dense winding & rdquo; this statement, dense winding power limit is not loose winding high, too high power loose winding may not paste core, dense winding because of the middle of the accumulation of heat is too large directly paste core. The power limit is not as high as the loose-wound. 　　6 frying oil The following are some of the most important features of the product. 　　Dense winding than loose winding is more likely to inhibit the phenomenon of fried oil. The reason is relatively simple, dense winding coil heat is more centralized, there is a slight phenomenon of frying oil can also be walled like the coil directly blocked. Loose-wound coils are more widely spaced, and the oil droplets caused by heating are not blocked by the wire itself, and will form a splash.   　　7 Compatibility of the heating wire The wire is compatible with the heating wire. 　　Loose-wound because the heating wire in a circle is not squeezed together with each other, so some can not be burned through the wire on the surface of the formation of oxidized insulation layer of the wire has a positive help. These wires (NI200) cannot be tightly wound, only loosely wound, otherwise they will short-circuit.   　　8 Taste The taste of the wire is not a matter of preference. 　　There is no such thing as a stronger or weaker mouthfeel, it varies greatly from oil to oil and atomizer to atomizer. The difference between different oils and different atomizers is enormous. 　　I can only say that in the conventional atomizer, if you do not want to toss too much, the choice of dense winding will not be a big mistake, good compatibility. The compatibility is good. 　　Summary The Dense Wrap is a great choice for a regular atomizer. 　　Dense-wound: fast heating, difficult to produce, good inhibition of frying oil, less space occupied  ; Loosely wound: even heating, production of oil, less space occupied. 　　Loose winding: even heating, simple production, high compatibility with the wire, not easy to paste the core The two are different in terms of smoke and flavor. 　　Both smoke, taste is not the same.