Solid-state vaping device user guide

Solid-state vaping device user guide: Solid-state vaping devices have officially launched in the domestic market. Many users have never tried one before, so how exactly do you use it, and is it enjoyable? Based on extensive feedback and inquiries, we have compiled the topics people care about most. 　　How to use the product

　　“How do you use this high-tech-looking thing?” ranks near the top of the most frequently asked questions. Since the Tencent video shown in the product introduction cannot be played, we’ll answer this hot topic in text instead.

　　Key points to remember:

　　1. The device body has only one control button;

　　2. Press the button five times within 2 seconds to switch to standby/power off;

　　3. Insert the pod while in standby mode, then press and hold to start/stop heating;

　　4. The device vibrates to indicate when heating has reached the point where you can start vaping, and when to stop;

　　5. As with the usual convention for smoking cigarettes, the first puff should be exhaled and not inhaled;

　　6. It is recommended to wait at least 3 minutes before using the next pod;

　　7. The front end of the heated pod becomes extremely hot! So after use, do not touch the metal cap of the pod immediately. Wait until it has fully cooled before handling it, or you may burn your fingers! 　　Vaping tips and precautions

　　1. The secret of the small hole

　　There is a small hole in the wall of the paper filter tube on the pod (not the one on the metal shell). Rotate the paper tube and you will see it.

　　Because everyone experiences flavor intensity differently, during use:

　　If you feel the aerosol from this pod is a bit hot or the taste is too strong and harsh, you can use a long, thin object such as a toothpick to widen the hole slightly and improve airflow.

　　Conversely, if you feel the flavor is too light, you can try partially or fully covering the airflow hole with your finger. This will make the taste richer and more roasted, and the aerosol temperature will also rise slightly. 　　2. Take the first and second puffs gently

　　Because the heating process is gradual, the more volatile moisture in the flavoring material is released first, and aerosol with higher moisture content tends to be slightly hotter. So please take one or two light puffs first to clear it out. After that, you can enjoy the roasted flavor coming from the material itself. 　　3. Shell detachment issue

　　Because the paper tube may be heated differently, or because some users reheat the pod repeatedly, the joint between the paper tube and the metal shell may become overheated and loosen. If you pull the pod out directly after use, the paper tube may separate from the shell.

　　If this happens, simply reinsert the paper tube into the shell, tilt it slightly, and slowly rotate it clockwise to remove it.

　　4. Cooling of the metal shell

　　After you finish using one pod, the metal shell needs some time to cool naturally. Do not rush to remove the pod right away. Set it aside for about 5 minutes to cool, then remove and discard it.

　　If you want to continue using another pod immediately, remember not to touch the removed pod directly. Place it in a container such as a glass or metal ashtray, and make sure it is kept out of reach of children and pets.