Recommended 200W Vaping Mods
Here are six vaping mods that break the 200W mark. In the early days of the power race, dual-battery series configurations were widely used. However, due to the output limits of 18650 batteries and chipset current tolerance, maximum power was usually arou
There are 6 e-cigarette consoles that have exceeded 200W. Let's see how many you have used. In the early stage of the power competition, dual electric series was widely used. However, due to the output performance of the 18650 battery and the limitations of the current that the chip can withstand, the maximum power of the mainframe is usually around 150W, but there are also cases that exceed 200W. Now let's take a look at these 200W e-cigarette consoles.
1. “The Mountain Opening Work: Malignant Ant VARIANT BOX 260W
Old players of the brand Vicious Ant should all know it. It is famous for its high-end consoles. It is produced by the group and has extremely low delivery volume. The corresponding price is higher. As a limited edition console, VARIANT BOX has fewer users. Here is a set of official data for everyone:
Power range: 5 watts- 260 watts
Voltage range: 2.0V - 8.4V
Minimum resistance: 0.1 ohms
Use Arctic Dolphin Lithium Polymer Battery (7.4V 1200mA)
“VARIANT BOX was originally directly called vicious ants and evil ants in players 'mouths. At the time, this model introduced model aircraft batteries and a maximum output power of 260W caused quite a stir among players. Just as everyone was still discussing and comparing whether the output of 150W consoles from other brands was suitable for the virtual standard, the vicious ants pushed the maximum output power of 260W to the players 'eyes. Even today, few consoles can match it.
However, since the domestic smog fever had not yet arisen at the time of birth, and the mainframe price was high, there were not many domestic users. On the contrary, in 2016, due to the drop in prices, it became popular in a small scale in the country.
2. IPV8 230W
The latest dual-battery mainframe produced by Green Leaf Company has changed its former round style, and its appearance style has undergone a great change. It uses the Yihai SX330-F8 chipset. Everyone knows that Yihai chips are famous for their stability and reliability. The IPV8 uses dual 18650 batteries with a maximum power of 230 watts. The voltage can be adjusted from 1.0V to 7.0V. The supporting resistance is 0.1-3. The body is very small, only a little bigger than a regular single battery. There are four temperature control modes: they support ni200 resistance wire, Ti resistance wire, ss315, and SX Pure (dedicated to Baishou atomizer).
Features:
a. Yihai chips have guaranteed quality.
b. Power output reaches the highest power of 230w
c. Support a wide range of resistors, with a minimum resistance of 0.1.
d. The dual 18650 has strong battery life.
e. Extremely compressed body size makes it easy to carry.
The IPV series has always been known for its cost performance, but there are mixed reviews in terms of appearance design. Those who like it and those who dislike it are also extreme, but this does not prevent the maximum power of the IPV8 from exceeding 200W.
3. SMOK H-PRIV 220W
H-PRIV has changed from its overly commercial appearance in the past and the design concept of its predecessor, CUBE, which caused a little cumbersome due to too many additional functions, and has become more easy-going. It adopts integrated side-pressure ignition button, dual 18650 batteries, power output range 6-220W, minimum resistance value is 0.1, voltage adjustable range 0.35-8V, temperature control mode supports three heating wires: NI, TI, SS.
Features:
a. Integrated side-pressure ignition button.
b. Strong power output, with the highest power and maximum voltage of 230w reaching 8V.
c. Support a wide range of resistors, with a minimum resistance of 0.1.
d. The dual 18650 has strong battery life.
Smok's breakthrough in the highest power exceeded the imagination of many people. When the editor himself first got the host, he was also skeptical, because ultra-high power did not conform to Smok's consistent product route and positioning. However, in actual testing, compared with the DNA 200W mainframe, the 220W output is indeed good. The first version had a slight ignition delay, so Smok immediately released an upgrade package. After the upgrade, the delay was completely fixed. The ignition was rapid and the response was sensitive.# p#pagination title #e#
4. IJOY LIMITLESS LUX 215W
Limitless lux is one of the few consoles that use dual 26650 batteries. Due to the huge size of the console using dual 26650 batteries, the player's possession is extremely low. LUX's battery compartment design greatly reduces the size of this console. In addition to the 26650 battery, this console can also use 18650 batteries, plus only battery conversion components.
The LUX215W mainframe is equipped with an IWEPAL chip this time, with a maximum output power of 215W and a battery capacity of 8400mAh. It supports temperature control output of nickel, titanium, and stainless steel. It provides three different output modes at the same power: Normal, Hard, and Soft. A user-defined output mode has also been added. And the shell can be replaced.
An academic question also arises about this LUX, which is how to calculate the battery capacity of the dual 26650? Is it 4200mAh or 8400mAh? In fact, for ordinary users, it is enough to know that this is a mainframe powered by two 26650 batteries, right?
Features:
a. Large battery capacity, reaching 8400mAh.
b. The power output reaches 215W.
c. The 18650 battery can be replaced.
d. Replaceable housing.
There are many strange phenomena in the field of e-cigarettes, one of which is that the 26650 equipment does not work well.“”“” In fact, the 26650 's mechanical lever and regulator box have been with us since the birth of e-cigarettes. Although they have the advantages of large battery capacity and high output, they have been difficult to mobilize due to shortcomings such as large size, heavy weight, and the need for a special charger. Player's desire to buy.
LUX knew that there were tigers in the mountains and preferred to travel towards the tiger mountains. It not only applied the 26650, but also used two as a power supply method. With the excellent output performance of the battery, it increased the maximum power to 215W, and also controlled the size and weight within the acceptable range. But for the domestic market, LUX, which is most promising to break the curse of 26650 devices, seems to have failed to complete its mission, but this does not prevent LUX from becoming a high-power host with more than 200W.
5. SIGELEI SNOWWOLF 218W
The Snow Wolf 218 produced by the veteran manufacturer Segray, like vicious ants, is a high-end mainframe. It adopts a stable wood panel, has a three-18650 battery design, an output power range of 10-218W, an output voltage range of 1-8V, and a maximum output current of 35A. The minimum resistance supports 0.1, and the temperature control wire supports Ni200, TI, SS304/316/317. Because it is a high-end mainframe and the market volume is extremely small, I have no access to it, so detailed information cannot be provided here.
Product size: 93.4x51.7x42.4mm
Material: Imported solid wood + aluminum alloy + zinc alloy
Weight: 160g
Screen: 0.91 ″ OLED
Power range: 10W-218W
Temperature control range: 100℃-300℃/200℉-570℉
Input: 9.6V- 12.6V
Output: 1.0V-8.0V
Maximum current: 36A
Supported battery model: 3pcs 18650
Mode: POWER/SS/TI/NI200/TCR/TFR
Resistance range: 0.1 - 3.0Ω
Heating wire support material range: nickel chrome/titanium/nickel/stainless steel (304/316/317) TCR/TFR
Charger support: DC 5V/2A
[Color selection]: black, blue, red, gray, silver.
6. SIGELEI FUCHAI 213W
The FUCHAI mainframe, also produced by Segray, uses aluminum alloy and zinc alloy casings, with a tough appearance and sharp edges. The SGL1605V1.5 chipset adds the Preheat Power Adjustment function. Power range 10- 213w, output voltage range 1-7.5V, minimum resistance value 0.1, temperature control mode supports NI, TI, SS304, SS316, SS317, TCR, TFR, dual 18650 batteries. The increase in preheating function can improve the damage caused by slow heating of the CLAPTON coil, increase the output power in the early stage of ignition, and quickly bring the coil to the appropriate temperature.# p#pagination title #e#
Features:
a. Dual battery design improves battery life.
b. The output power reaches 218W.
c. The Preheat Power Adjustment function has been added to increase the violence level of smoke in the early stages of ignition.
d. The small size improves portability.
Summary:
From 2014 to the beginning of 2015, oil dripping atomizers were not yet popular. Most domestic e-cigarette users were using EGO and mouth-suction small cigarette atomizers, and the power required did not exceed 30W. With the popularity of large smoke oil-dripping atomizers, the commonly used resistance value has changed from above 1 to 0.3-0.5. The output power of 30W can no longer meet the daily needs of players. Manufacturers have begun to introduce single electric hosts with a maximum output of 75W. To meet the daily power needs of players for oil-dripping atomizers.
Similarly, players 'demand for large smoke has also driven the update of the structure and practicality of the atomizer. Today, with the further changes in the base structure and air intake structure of the atomizer, there are more forms of heating wires that can be assembled, the atomization space is larger, and the taste is getting better and better. The regular data used by big smoke players has reached 0.2. Starting from, it is often around 0.1. Corresponding to this, the power of the atomizing coil has been increased from 35W to 60W-170W, which has caused e-cigarette manufacturers to increase the main power of the mainframe.
At the end of 2016, with the popularity of composite fancy heating wires, the high-power output of 170W was gradually not enough to satisfy fancy heating wire enthusiasts, which will inevitably promote e-cigarette consoles into the ultra-high power era with output power of more than 200W. These are all the ultra-high power hosts I can find now. So, based on the recent launch of the DNA250 chip by DNA Company, a large wave of ultra-large output power consoles with more than 200W is coming soon. The starting gun for a new round of power competition has already been fired. Are we users, Vaper, and players really ready this time?
1. “The Mountain Opening Work: Malignant Ant VARIANT BOX 260W
Old players of the brand Vicious Ant should all know it. It is famous for its high-end consoles. It is produced by the group and has extremely low delivery volume. The corresponding price is higher. As a limited edition console, VARIANT BOX has fewer users. Here is a set of official data for everyone:Power range: 5 watts- 260 watts
Voltage range: 2.0V - 8.4V
Minimum resistance: 0.1 ohms
Use Arctic Dolphin Lithium Polymer Battery (7.4V 1200mA)
“VARIANT BOX was originally directly called vicious ants and evil ants in players 'mouths. At the time, this model introduced model aircraft batteries and a maximum output power of 260W caused quite a stir among players. Just as everyone was still discussing and comparing whether the output of 150W consoles from other brands was suitable for the virtual standard, the vicious ants pushed the maximum output power of 260W to the players 'eyes. Even today, few consoles can match it.
However, since the domestic smog fever had not yet arisen at the time of birth, and the mainframe price was high, there were not many domestic users. On the contrary, in 2016, due to the drop in prices, it became popular in a small scale in the country.
2. IPV8 230W
The latest dual-battery mainframe produced by Green Leaf Company has changed its former round style, and its appearance style has undergone a great change. It uses the Yihai SX330-F8 chipset. Everyone knows that Yihai chips are famous for their stability and reliability. The IPV8 uses dual 18650 batteries with a maximum power of 230 watts. The voltage can be adjusted from 1.0V to 7.0V. The supporting resistance is 0.1-3. The body is very small, only a little bigger than a regular single battery. There are four temperature control modes: they support ni200 resistance wire, Ti resistance wire, ss315, and SX Pure (dedicated to Baishou atomizer).
Features:
a. Yihai chips have guaranteed quality.
b. Power output reaches the highest power of 230w
c. Support a wide range of resistors, with a minimum resistance of 0.1.
d. The dual 18650 has strong battery life.
e. Extremely compressed body size makes it easy to carry.
The IPV series has always been known for its cost performance, but there are mixed reviews in terms of appearance design. Those who like it and those who dislike it are also extreme, but this does not prevent the maximum power of the IPV8 from exceeding 200W.
3. SMOK H-PRIV 220W
H-PRIV has changed from its overly commercial appearance in the past and the design concept of its predecessor, CUBE, which caused a little cumbersome due to too many additional functions, and has become more easy-going. It adopts integrated side-pressure ignition button, dual 18650 batteries, power output range 6-220W, minimum resistance value is 0.1, voltage adjustable range 0.35-8V, temperature control mode supports three heating wires: NI, TI, SS.Features:
a. Integrated side-pressure ignition button.
b. Strong power output, with the highest power and maximum voltage of 230w reaching 8V.
c. Support a wide range of resistors, with a minimum resistance of 0.1.
d. The dual 18650 has strong battery life.
Smok's breakthrough in the highest power exceeded the imagination of many people. When the editor himself first got the host, he was also skeptical, because ultra-high power did not conform to Smok's consistent product route and positioning. However, in actual testing, compared with the DNA 200W mainframe, the 220W output is indeed good. The first version had a slight ignition delay, so Smok immediately released an upgrade package. After the upgrade, the delay was completely fixed. The ignition was rapid and the response was sensitive.# p#pagination title #e#
4. IJOY LIMITLESS LUX 215W
Limitless lux is one of the few consoles that use dual 26650 batteries. Due to the huge size of the console using dual 26650 batteries, the player's possession is extremely low. LUX's battery compartment design greatly reduces the size of this console. In addition to the 26650 battery, this console can also use 18650 batteries, plus only battery conversion components.
The LUX215W mainframe is equipped with an IWEPAL chip this time, with a maximum output power of 215W and a battery capacity of 8400mAh. It supports temperature control output of nickel, titanium, and stainless steel. It provides three different output modes at the same power: Normal, Hard, and Soft. A user-defined output mode has also been added. And the shell can be replaced.
An academic question also arises about this LUX, which is how to calculate the battery capacity of the dual 26650? Is it 4200mAh or 8400mAh? In fact, for ordinary users, it is enough to know that this is a mainframe powered by two 26650 batteries, right?
Features:
a. Large battery capacity, reaching 8400mAh.
b. The power output reaches 215W.
c. The 18650 battery can be replaced.
d. Replaceable housing.
There are many strange phenomena in the field of e-cigarettes, one of which is that the 26650 equipment does not work well.“”“” In fact, the 26650 's mechanical lever and regulator box have been with us since the birth of e-cigarettes. Although they have the advantages of large battery capacity and high output, they have been difficult to mobilize due to shortcomings such as large size, heavy weight, and the need for a special charger. Player's desire to buy.
LUX knew that there were tigers in the mountains and preferred to travel towards the tiger mountains. It not only applied the 26650, but also used two as a power supply method. With the excellent output performance of the battery, it increased the maximum power to 215W, and also controlled the size and weight within the acceptable range. But for the domestic market, LUX, which is most promising to break the curse of 26650 devices, seems to have failed to complete its mission, but this does not prevent LUX from becoming a high-power host with more than 200W.
5. SIGELEI SNOWWOLF 218W
The Snow Wolf 218 produced by the veteran manufacturer Segray, like vicious ants, is a high-end mainframe. It adopts a stable wood panel, has a three-18650 battery design, an output power range of 10-218W, an output voltage range of 1-8V, and a maximum output current of 35A. The minimum resistance supports 0.1, and the temperature control wire supports Ni200, TI, SS304/316/317. Because it is a high-end mainframe and the market volume is extremely small, I have no access to it, so detailed information cannot be provided here.
Product size: 93.4x51.7x42.4mm
Material: Imported solid wood + aluminum alloy + zinc alloy
Weight: 160g
Screen: 0.91 ″ OLED
Power range: 10W-218W
Temperature control range: 100℃-300℃/200℉-570℉
Input: 9.6V- 12.6V
Output: 1.0V-8.0V
Maximum current: 36A
Supported battery model: 3pcs 18650
Mode: POWER/SS/TI/NI200/TCR/TFR
Resistance range: 0.1 - 3.0Ω
Heating wire support material range: nickel chrome/titanium/nickel/stainless steel (304/316/317) TCR/TFR
Charger support: DC 5V/2A
[Color selection]: black, blue, red, gray, silver.
6. SIGELEI FUCHAI 213W
The FUCHAI mainframe, also produced by Segray, uses aluminum alloy and zinc alloy casings, with a tough appearance and sharp edges. The SGL1605V1.5 chipset adds the Preheat Power Adjustment function. Power range 10- 213w, output voltage range 1-7.5V, minimum resistance value 0.1, temperature control mode supports NI, TI, SS304, SS316, SS317, TCR, TFR, dual 18650 batteries. The increase in preheating function can improve the damage caused by slow heating of the CLAPTON coil, increase the output power in the early stage of ignition, and quickly bring the coil to the appropriate temperature.# p#pagination title #e#
Features:
a. Dual battery design improves battery life.
b. The output power reaches 218W.
c. The Preheat Power Adjustment function has been added to increase the violence level of smoke in the early stages of ignition.
d. The small size improves portability.
Summary:
From 2014 to the beginning of 2015, oil dripping atomizers were not yet popular. Most domestic e-cigarette users were using EGO and mouth-suction small cigarette atomizers, and the power required did not exceed 30W. With the popularity of large smoke oil-dripping atomizers, the commonly used resistance value has changed from above 1 to 0.3-0.5. The output power of 30W can no longer meet the daily needs of players. Manufacturers have begun to introduce single electric hosts with a maximum output of 75W. To meet the daily power needs of players for oil-dripping atomizers.
Similarly, players 'demand for large smoke has also driven the update of the structure and practicality of the atomizer. Today, with the further changes in the base structure and air intake structure of the atomizer, there are more forms of heating wires that can be assembled, the atomization space is larger, and the taste is getting better and better. The regular data used by big smoke players has reached 0.2. Starting from, it is often around 0.1. Corresponding to this, the power of the atomizing coil has been increased from 35W to 60W-170W, which has caused e-cigarette manufacturers to increase the main power of the mainframe.
At the end of 2016, with the popularity of composite fancy heating wires, the high-power output of 170W was gradually not enough to satisfy fancy heating wire enthusiasts, which will inevitably promote e-cigarette consoles into the ultra-high power era with output power of more than 200W. These are all the ultra-high power hosts I can find now. So, based on the recent launch of the DNA250 chip by DNA Company, a large wave of ultra-large output power consoles with more than 200W is coming soon. The starting gun for a new round of power competition has already been fired. Are we users, Vaper, and players really ready this time?
