High-vapor atomizer review: Petri DOTRDTA trial report

Working overtime, working overtime, working overtime, recently working overtime secretly,

I'm lazy today, relax, and hurry up and write an homework,

Finish writing and continue to work overtime. There is not much time, let's get to the point!

?

[Packaging]

Petry, all products are packaged in this way,

But no matter how you look at it, you can't get tired of it. Every specification of packaging is so tall!

?

[Open the box]

The same is true for the interior, with the consistent style of layout and placement,

I once held hands and thought that such a placement was the most secure.

The protection of internal items is also in place,

Petri products I bought in the past have never encountered damage.

However, from the glass bin of the last DotTank finished atomizer to this RDTA spare part glass bottle,

?

Hey, the broken glass bottle. When it broke, I realized that the body of the glass bottle was still relatively thick.

Ran goose, what went wrong? Violent express delivery? Or...?

?

[Subject]

This is the first time that Petri has made an RDTA type atomizer. The material is made of PEI material,

High temperature resistance and corrosion resistance, double matching in terms of dripping nozzles, choose at will,

This is a 24mm diameter tripod atomizer for dripping oil, storing oil and bottom filling.

The drip nozzle has a universal 810 interface, and the oil storage tank has a capacity of 2.5ml.

#p#Pagination Title #e#?

[Split]

Structurally, how to say it, it looks very simple.

But when you use it in practice, you will discover the connotation and variability

In the electrode column, the innovation branch single electrode column model is extended from the previous generation of Petri dripping oil atomizer.

I won't introduce much about this. The revolutionary innovation of the Petri single column, the oil-dripping atomizer,

Is it over? Wrong, middle pillar ceramic insulation must also be one of the biggest highlights.

?

As shown in the figure, here is the combination of the oil storage chamber and the electrode column.

Plug-in style! It seems to be very easy to leak oil,

But the sealing effect of the upper and lower double rubber rings is quite good,

It has been a month since I got this atomizer hand in hand.

Plugged and pulled back and forth dozens of times, but I have never seen a leak!

?

This is the only thing I am not satisfied with, oil injection!

In RDTA mode, there are only two ways to inject oil,

1. Use a pinhole oil filling bottle to inject oil into the mid-air column;

2. Pull out one corner of the cotton at a time, and then oil it;

In comparison, the first oil filling method is quite convenient.

The 810 's dripping nozzle has a large diameter, so you can inject oil directly.

The second way, you need to pull out the plug has been more compact cotton re-oil

Then he stuffed it back, which was a lot of trouble!

?

[Making silk]

The heating wire used today, the welfare heating wire used in the forum,

Black pig NI80 heating wire, 10 pieces per bottle, 9.9 free shipping nationwide! Free shipping nationwide! Free delivery!# p#pagination title #e#

Single resistor 0.28Ω, dual generator 0.14Ω

The heating wire lights up quickly and heats evenly. Basically, it will be fine with a little adjustment.

After burning, the color of the surface of the heating wire is also very beautiful. Burn blue

Just skip the cotton, it feels like you can't use it up no matter how you use it.

The key points to be mentioned here:

If your heating wire is not regular enough and requires a long time to adjust,

Then hand in hand, it is recommended to unload the oil storage silo and load the box on a single column for wire burning operation.

Because the heating wire is close to the PEI oil storage bin, although the PEI material is resistant to high temperatures,

But it should not withstand the high temperatures generated by long-term wire-burning operations!

?

Smoke effect! Although the timing of the capture was not very good,

But the overall effect is still good.

?

New toys, of course, must be equipped with good oil. Does anyone still remember this?

?

[Summary]

Petri's products have established a good reputation long ago,

From the beginning to the present, the quality of the product itself is undoubtedly good.

It has also been well received by many players in terms of experience.

But perhaps due to price issues, Petri was not cared for by most players.

But what Qianshou wants to say is, walk your own path and smoke your own cigarettes!

Although the atomizer is named Petri TA,

But it is a tripod atomizer that drips oil, stores oil, and bottoms oil,

This is Petri, I understand you!?