MAD DOG V2 & Negative Pressure Oil-Feeding Kit Vape Atomizer Review
It feels like a wave of new and impressive products has appeared all at once. What are we watching most closely? Definitely the PANDA RDA and MAD DOG V2, plus LIFT’s negative pressure oil-feeding kit. Today we’re starting with the MAD DOG V2 and the much-
Recently, it seems that many new and good products have been exploded.
What are we most concerned about? That must be PANDA RDA and MAD DOG V2! By the way, there is also LIFT's negative pressure oil guide kit. Today, let's talk about Ergou Zi and Dog Er first… No, it's the second generation of mad dogs! And the "negative pressure oil guide kit" that everyone is very curious about MAD DOG V2 KIT ?
I believe there are many officials in the forum who have used old mad dogs.
Because of its simplicity, excellent taste and high cost performance,
As well as the variety of color matching options to choose from,
Although there may be minor problems with some of the electrodes in the middle,
But the reputation is still very good.
?
Mad Dog Second Generation Based on Mad Dog,
Add and improve some designs,
What is the effect?
After just a few days of use,
I don't dare to comment recklessly for the time being,
But it is enough to feel the design team's heart.
appearance
Mad Dog V2 (It's so troublesome to shout. Can I call you Buttface?) The appearance becomes very round, The top changed from a slope to a circular dome, The shrinking top also makes the atomizer look smaller,#p#pagination title #e# Without the original edges and dominance, More gentleness and introspection; ?
Dripping mouth is still the dog mouth we are familiar with,
There are also two anti-condensation ravines inside and outside,
But the materials are a little different,
There is no explicit material on the packaging,
Presumably, it is a race for steel land,
Smooth surface, low friction,
It feels a little difficult to plug and plug.
The outer cover of the atomization bin is still made of aviation aluminum oxidation,
Colorful and light;
A finely carved triangular D character LOGO on one side
One side is the word MAD DOG;
CNC fine carving, deep scoring,
The edges of the LOGO are neat and smooth.
?
Below the collapsed dome,
A plated brass insulation ring has been added to
When we usually smoke,
Lips will touch the top of the atomization chamber more or less,
The temperature of the atomization chamber,
Determines how we feel about using it;
The emergence of brass plated insulation rings,
Separate the atomization chambers,
reduces the speed of heat conduction,
This also reduces the temperature at the top of the atomization chamber,
It also improves our experience of using it.# p#pagination title #e#
?
Compared with mad dogs,
The inner dome of the two dogs is more rounded,
Intended to bring more concentrated smoke,
A better experience of using it.
base electrode
The electrode column is still the double column and four holes that we have long been accustomed to.
Convenient threading and simple operation;
The electrode screws used can be replaced according to personal habits,
All upgraded to plated screws,
Current is more stable,
Relatively speaking, output is more violent;
?
Contrary to the electrode holes of its sister model,
The second dog's threading hole is high in the middle and low on both sides.
Of course, each threading hole is bigger,
Although the same pole filament holes are connected,
Large filaments that can be put in certain extreme data,
However, there are also small slopes that help fix common data heating wires,
Whether it's 1/3;2/4 or 2/3 ;2/3
Even 1/4;1/4 #p #pagination title #e#
It's easy to use.
?
A PEI insulation mat is still installed at the bottom of the atomizer,
It can both insulate and prevent condensation,
I won't go into it again,
I believe everyone has experience.
?
The protruding length of the bottom electrode of the second dog is almost the same as that of a mad dog.
However, relatively speaking, Ergou's electrode chamfer is more,
The contact area with the battery has become relatively smaller.
Negative pressure guide kit
Although the Lift siphon tank system is also added to the lower oil tank,
But it is completely different from the concept of RDTA,
Don't confuse it.
But before talking about feelings, Let's listen to Fan Fan's nonsense again. Any new product, Any product that uses novel technology, There were some minor problems in the early stages, Compared with mature technology, it may even be a little lame, For example, early mobile phones and cars,#p#pagination title #e# But! We shouldn't give up on innovation because of this, should we?
We all love RDA,
But after a few puffs, you have to replenishappropriate amountThe operation of tobacco oil,
Sometimes it's really inconvenient.
?
So RDTA was born with an oil bunker added to the bottom of the RDA
RDTA guides cotton hanging into the oil silo,
There will be too long oil passages, insufficient oil supply,
Inconvenient oil filling, easy to leak oil and other problems,
Gradually, fewer and fewer people use it.
?
Then pour the bottom box back,
But because of the need to buy a new expensive box,
Many people are deterred,
Even taking a wait-and-see attitude.
The siphon can system can actually be installed on any atomizer with bottom injection electrode screws,
saves the cost of purchasing a new box or atomizer,
And without squeezing,
Automatic replenishment of tobacco oil with suction,
A small oil tank can completely liberate your hands.
?
There is a blue gasket inside the Lift siphon can,
After the atomizer is installed, the entire oil cabin is in a one-way sealed state,
Just like the one-way outlet valve in the 3M industrial mask,
You can only breathe in, not breathe out.
Especially after closing the atomizer air inlet,#p#pagination title #e#
It can suck up a large amount of oil in the warehouse,
But it cannot be vented through the pores of the oil silo.
When we usually use it,
The pressure of the intake air can also be called suction
Will be applied to the Lift siphon can through the bottom injection electrode,
Then suck up the oil in the cabin,
Add tobacco oil to cotton.
?
Oil absorption is determined by the size of the adjustable air holes in the upper layer of the oil silo,
The smaller the opening, the more it absorbs oil,
On the contrary, the larger the opening, the less the oil absorption.
If there is a serious shortage of oil,
Turn off the air inlet of the atomizer, close the air holes of the oil bin,
After a few gentle sips, the cotton is already fully moist.
A deep four-way oil guide groove at the bottom of the oil silo,
Lower than the level of the oil silo, it has a good tour guide effect,
You can almost suck up the last drop of oil in the cabin.
?
Negative pressure oil guide requires good air tightness,
Coupled with the fact that he was unwilling to completely disintegrate the "toys" he had just obtained,
Fan Fan did not use the method of demolition to find out.
So when we replace tobacco oil,
It can only be cleaned by "rinsing with warm water" and "spinning and drying".
It should be noted that
After cleaning, it needs to be completely dried,
Avoid mixing water with tobacco oil,
#p#Pagination Title #e#Problems such as frying oil arise,
Affect the experience of use.
?
In the picture, Fan Fan puts a pair of pieces of clothing in the Erdog suit.
Our country's unknown silk master-Liang Mao
A pair of aliens made in a hurry at the exhibition, with double hair of 0.13 ohms,
Large G, standard output gear, 80W output
Suction time is approximately 2-4 seconds per puff,
After half the warehouse of oil fell, the cotton dried up slightly.
But it does not affect the use.
If you want to keep cotton saturated and moist all the time, there are two ways:
One method is to take a puff and
Take a few more puffs into the atomizer,
It can not only replenish tobacco oil,
It can also cool the temperature of the outer chamber of the atomizer through the flow of air;
?
The second method is to turn off the atomizer after air intake
With a gentle sip, a large amount of tobacco oil will be replenished into the atomization bin,
Although it is troublesome, the effect is very obvious.
Practical, convenient, novel, and will not be lost,
It's the feeling left by this MAD DOG V2 KIT suit,
Adhering to the reputation and quality of the dog series,
Although there may be minor problems that are worth deliberation and improvement,
But overall it is still very good.
When handled properly,
Fill a tank of oil and
Don't worry about cotton,
You don't have to look at the oil quantity,#p#pagination title #e#
Enjoy the thrill of a mad dog comfortably,
Keep pumping the oil down.
?
The development of technology,
Isn't it just to make life easier?
