GeekVape Peerless RDTA vaping atomizer device introduction

Peerless, unparalleled, is the RDA launched in March this year
In August, GeekVape derived its concept and main structure into the form of RDTA
And is the newborn matchless as matchless?
Or is it even more unparalleled when combined with the design of oil storage?
Let us continue to watch

In addition to the main body, the contents after unpacking include:
Dual-size suction nozzle, 510 adapter ring, single-shot kit, spare 4ml glass chamber, three-way screwdriver
Very many spare O-Rings with a set of four spare screws and two insulating washers
and Alpha Briad Coil braided wire that appeared for the first time in GeekVape products

The 510 suction nozzle part has a groove design on the upper edge to prevent condensation inlet
The 810 suction nozzle uses bottom-up opening to allow condensate to flow back
It is a pity that the concept of the first version of Peerless's large-area conical PEI nozzle did not continue
After all, it has a good feeling of appearance recognition and functionality

Beyond the topic, the red color of this atomizer is very vivid like Ferrari red
Unfortunately, the color colors of my console don't match
I still choose the most plain SS color matching


The base of the Peerless RDTA displays the name, product and manufacturer information

The nine side air inlets of the RDA era have been transformed into common strip air inlets
Adjustment is much more intuitive
Also because RDTA does not need to open positions frequently to replenish oil
The original two-piece atomization chamber was changed to a non-detachable integrated design

The main selling point of this Peerless RDTA-oil filling method
It uses a hinge-lock filling
Insert the oil bottle into or against it and quickly fill it with oil
The air in the glass chamber will be exhausted through the small hole on the other side

Initially, I was worried about whether the larger size drop-shaped dropper would be difficult to use
After actual oil filling, it was found that the inclination angle in front of the oil filling hole was just enough to bring the tip closer
Under light pressure, the smoke oil is introduced into the warehouse quite smoothly

On the other side of the wire stand is a two-piece single-shot kit
Gently install it on the wire stand to block the oil guide hole
Most of the kit is made of soft silicone resin
#p#Pagination Title #e#The upper part is made of ceramic covering the silicone resin and filling the excess atomization chamber space

The Peerless RDTA pole continues the double pole six-hole design of the RDA era
However, the two groups of connected thread locking holes in the lower row are changed to four independent thread locking holes
What are the characteristics of this six-hole arrangement different from the general four-hole arrangement?

Deliberately use the accompanying braided thread and 24ga*2 gram thread to demonstrate wrongly
It can be seen that the corresponding locking wire holes can be selected in the upper and lower double rows according to the width of the stitching
The width between the poles is 11mm
The corresponding size of the locking wire hole is about 2*3mm
Coupled with the above structure, the adaptability of this Peerless RDTA to the coil is greatly improved
Even players who pursue limits and skills can challenge the erection of four-shot coils

The braided wire attached this time is quite good
There was still some struggle to build it so quickly
However, it was discovered that GeekVape has two new specifications of finished braided wire on the shelves
So I used it directly after taking photos ~
I also put some coils into the shopping cart when buying a new atomizer

The width and height of 24*41mm are still moderate
It also does not appear out of place after combining it with the recently launched Aegis by GeekVape

In addition to the attached braided wire, two types of single-wire coils were also tested this time.
The single-wire coil was set to 24AWG SS316 and was used to pick up the Φ 2.5 and 3.0 mm, 5 and 7 turns respectively
and use single\double hair respectively to experience its resolution

The single line parts are all used with 510 nozzles
The coil is positioned horizontally and close to the side air inlet
The height of the single thread makes it slightly higher than the upper edge of the air inlet; the braided thread is flush

I highly recommend adjusting the air inlet to half open or 1/3 for the single line under single\double hair.
The amount of smoke is moderate without losing the intensity, and the performance of 5 or 7 laps is in line with expectations
Such a suction resistance combined with the 510 nozzle is more in line with my preference
It is no secret that even with a single-shot kit
The taste is still not comparable to that of an atomizer designed for single lines
After all, this is not an area where Peerless uses its strengths.

Needless to say, the strength of using braided wire is self-evident
Because compared with the ordinary gram thread I use, the braided thread has a higher oil catching ability
Tobacco oil that evaporates in a short period of time will bring considerable mist
Even if you have 4ml of oil storage, you will still be impressed by the fuel consumption.
Regardless of the smoke and smoke curling from the 810 nozzle; the heavy smell of the 510 nozzle
Feel the process of rushing into the fog clearly in the mouth and nose. Only the word refreshing can describe #p#pagination title #e#
Personally, I think this setting can best understand the true incomparable feeling after being transformed into RDTA

However, the huge calorific value is matched with the atomization chamber whose dome is not sufficiently harmonious
This combination means more condensation occurs
Fortunately, taking more air after firing can slightly prevent this from happening


At the end of the article, the characteristics of Peerless RDTA are summarized as follows:
. Hinge-lock filling improves convenience and reduces the risk of oil leaks
. The wire stand design and space have a high degree of adaptability to the coil
. Single shot kit increases user choice
. The accompanying braided thread has excellent odor performance and workmanship
. The RDTA structure allows Peerless to better reflect the unique meaning of the word

There are also some designs that are difficult to define:
. Although the smoke direction is large, the dome of the atomization chamber will not gather, and condensation will occur.
. Personally, I prefer the nozzle design of the first version of Peerless RDA


In terms of positioning, the RDTA design derived from Peerless RDA
Allow players who do not have or do not like the bottom oil filling system to enjoy unparalleled violence
It also eliminates the need to frequently open the lid to replenish oil
Convenient and highly compatible wire stand makes it easy to set up all kinds of filaments
If you want to adapt to a single-wire coil, you can also use a single-shot kit or replace the suction nozzle to improve saturation and resistance.

If you just want to use it as an RDA, you can simply remove the silo and add oil.
Just note that part of the originally deep base is occupied by hinge-type baffles
Oil storage capacity is not as good as previous versions
Coupled with its trend, it is simply smoke and violence
Or is it better to return to RDTA to show off your talents?

This time, Peerless retains the incomparable intuitive and violent output of the original version
Another unparalleled that enhances battery life and convenience of use
It is indeed not worthy of his name!