Reliable mechanical style — PISTONS RDA atomizer unboxing and review

I don't know if it's because I'm lazy or because I have a more "experienced sea and difficult water" spirit, but I don't seem to be so interested in equipment recently. Think about it carefully, smoking e-cigarettes has become a daily habit, just like moving from love to marriage. It lacks fanaticism and passion, but it adds a touch of plain simplicity-simplicity and ease of use is true. Under such adjustment, today I welcome you to have a nebulizer that fully meets my current requirements: [PISTONS RDA Piston Nebulizer].

Judging from the packaging, this [PISTONS RDA Piston Nebulizer] is quite simple, with a LOGO on the front, a name on the side, and an Chinese label on the back. It can be seen from its content that the brand of this atomizer is Mask King from the United States, and is distributed by Beijing Mankesway International Trading Co., Ltd. in the Asia-Pacific region. I believe that everyone must have heard of this name. The previously evaluated [ISUMMER Zero Watermelon] smoke oil and [Viking VAPES Viking Vikings] smoke oil are sold by them. In addition to the necessary product logos, there is no relevant introduction on the packaging about the structure and performance of the oil-dripping atomizer. For novice players, they can only see its true colors by opening the box.

An accessory box, an atomizer body, and an internal hexagonal screwdriver are placed in the shock-absorbing structure inside the package. The accessories are subdivided into: 10 internal hexagonal spare screws, 4 Clapton threads, 1 510 conversion interface, and 5 spare rubber rings. The number of spare screws is really touching, so that you have no worries about slipping screws. It is worth mentioning that the middle and lower section of the screwdriver has a magnet setting to prevent small screws from falling off and missing during the operation of removing the heating wire. I don't know if the manufacturer is full of confidence in the product or the user, but the packaging still does not contain any instructions on the product's use and parameters, so an official introduction chart is attached.

[PISTONS RDA Piston Nebulizer] Overall, the shape is relatively novel. It is neither round and streamlined nor abrupt chamfers. The segmented structure of "progressive layers" is uneven and has a strong "industrial machinery" texture. The feel is very smooth, without barbs or rough. It can be roughly divided into three parts: drip nozzle, chamber body and base. As an oil-dripping atomizer, its height and diameter are relatively conventional, and it will not be too small and cumbersome. The characteristic still lies in the appearance, and I will explain it in detail later.

The external shape of the entire atomization chamber is really "as its name suggests". I believe that people who play cars can see it at a glance. Its appearance is exactly the same as the piston parts, and the top blade design is also similar to the heat sink of a V-cylinder engine. This design not only enhances the heat dissipation performance of the atomizer, but also provides a very good focus for withdrawing the chamber body. The only worry is that it will be inconvenient to clean up the hidden dirt. Below the "Leaf" is engraved with "#p#pagination title #e#With the words "PISTONS RDA", the concave surface also plays a role in increasing friction. The side air intake method is adopted. The elliptical air intake holes on both sides overlap with the base, and the air intake size is adjusted by rotation.

From the inside, it can be seen that the warehouse wall gradually becomes thinner from top to bottom, and the sections are obvious. The upper end is dome designed and matched with a conical PEI drip nozzle.It has a good gathering effect on smoke. One more thing to say about the drip nozzle is that the default type 810 PEI material is very thick and has significant thermal insulation performance. However, the inner wall is not designed with a groove. In actual use, the suction force will occasionally have a concentrated condensation inlet, and a metal conversion sheet will be added. Adapted to the 510 model.

The base design of the [PISTONS RDA Piston Nebulizer] is high, which can also be understood as a deep oil tank. The oil storage capacity of 7ml is simply a boon for "lazy cancer" patients. The side air intake is designed into a very obvious slope structure, which guides the airflow to blow the heating wire directly from the side below, which also fully increases the height of the "oil line". The positive electrode is located in the center of the base, similar to a semi-open grooved wire pressing, and the negative electrode is distributed on the side wall of the base. The fixed angle of the silk feet is very precise, which is what the official praises of "one-cut forming". That is to say, after installation, the coil can be centered symmetrical without requiring much adjustment. There are regular identification designs such as numbers and names on the bottom, and the electrodes protrude clearly, and the pole and box can be used.

Just pick up the officially adapted silk and start operating it. Maybe I have made too many double columns and four holes, and I am used to fixing the two sides in turn, but when I installed one bullet and put on the other bullet, I found that the positive wire leg was difficult to remove in the "crack". In fact, I can fix the two positive poles first., cut and then fix the negative poles respectively. These all depend on the details of the operation, which is not a problem for players who are rotten with various structures. It is best to completely remove the screws before fixing the negative pole. A magnetic screwdriver comes in handy. In fact, as long as there are holes, a hard plug will work. There are obvious grooves on the side walls to facilitate wire cutting operations. At the same time, space is reserved for thread trimming adjustment to avoid scratching the lid. I think the latter is more effective than the former.

The installation process of the heating wire was very smooth. After completion, it was found that there was no need for much adjustment, and the filament coil was naturally symmetrical in the center. From the perspective of the overall space, the 3.0mm coil diameter is just right, and if it is larger, it may easily touch the narrow part of the negative electrode. I was very surprised by the synchronization of the wire burning at one time. In fact, if thinner conventional wires are used, or the number of closely wound turns is too small, because the coil structure is in the groove, it is actually not very convenient to adjust. The difficulty of loading cotton and oiling is negligible, because the oil tank is very wide, so as long as the length is grasped well and you can plug it at will.

The taste is not empty when the air intake is fully opened. If you do not pursue particularly large smoke, the suction resistance at half of the air intake is very friendly. This is due to the obvious gathering effect of the drip nozzle. After replacing the direct suction nozzle, the experience is poor. The air flow was stable and full without any disturbance. I tried some tobacco oils such as zero-degree watermelon, organic farm series, and cola man. The sweetness of the tobacco oil is very good. It is an oil dripping atomizer that can highlight the obvious characteristics of the tobacco oil. The heat from continuous suction is not obvious, and the lips will not feel burning under high-power working conditions.

This model consists ofDistributed by Beijing Mankesway International Trading Co., Ltd.Mask king—[PISTONS RDA Piston Atomizer] focuses on a tough mechanical style. The unique base design makes wire installation very simple and reduces the difficulty of coil adjustment. The side air intake structure and a deep oil storage tank improve the level of "battery life" on the one hand, and at the same time It also reduces the occurrence of oil leaks, has good insulation, full smoke, and a rich taste. In my opinion, it is true to use "reliability" to match its performance. The shortcomings may be that the packaging lacks some parameters and operating instructions, too few color matching options (currently only stainless steel primary colors), occasional condensation inlets occur, and the appearance evaluation is seriously polarized (anyway, I like it very much, and it is simply too good for the primary metal body). In general, although the current equipment selection space is very large, the fresh appearance and structural design will always arouse your interest.