HOTCIG SNIPER Vape Kit: A Powerful Tool for Big Clouds

HOTCIGThe brand of Heat was popular in the smoke,DNAIn the era of hot chips, it relies onDX200andDX75The two mainframe box products have successfully captured the hearts of many players, but as the market changes, the heat seems to have slowly faded out of the domestic market.

But now the smoky market seems to be gradually recovering, and the Heat has also brought its brand new productsSNIPERSniper suit.

The sniper suit for this review is a sample, so it is unclear why the accessories included inside are included in the end. However, the sample is already a large product, so it is basically the same as the official product.

Its overall size is very small, which is closer to current types of small cigarette equipment. At the same time, the zinc alloy mirror-light frame and the two sides of the imitated stabilizing wood pattern also bring a very high visual quality.

But what is inevitable is that the surface of the mirror light is naturally more prone to problems such as scratches and fingerprints.

On its side are the ignition button and the power adjustment button below. In order to maintain integrity, the screen is hidden between the upper and lower buttons. Normal operation ignition button press5Turn off the machine and press3The next button locks all buttons, and the two power buttons are pressed at the same time to lock the power. At the same time, it also has normal power mode, bypass mode and custom output mode.4Make adjustments under.

In addition to some regular displays, the mark of an arrow in the middle changes color corresponding to the smoking time below, and the reality of resistance, actual voltage, and ampere can also be seen below.

#p#Pagination Title #e#

?

The heat dissipation and pressure relief hole on one side can be seen at the bottom, and its charging interface is now gradually becoming mainstream.TYPE-CInterface.

Its translucent oil sump and the opening in the fuselage form a visual structure for easy observation of oil volume.

?

The air intake of the oil cabin is located in strip grooves on both sides of the top of the cabin body. The ventilation volume is the use scenario of lung suction and cannot be adjusted.

?

There is a huge oil filling hole on the side of the oil tank, but the silicone plug is positioned upwards, which makes it a bit awkward when opening.

?

?

When you come to the bottom, you can see its irregular shape. There are four magnets around it fixed to the host. It is very stable after installation.

The drip nozzle is routine510Specifications.

thanks to the18650The battery is powered by power, so its battery compartment is located on one side. When installing the battery, pay attention to the internal sign that the positive pole is facing down.

The core sample provides a1.2Omega regular cotton core and a0.6 #p #Pagination Title #e#For the net core of Ω, since the oil bin cannot be adjusted, it uses the air intake size of the core as a passive adjustment.

Note here0.6The oil guide hole of the Ω core is actually better than1.2Omega's are still small?

The installation of the core is fixed to the oil bin through silica gel, and attention should be paid to its specific direction.

There will be a slight deviation in the resistance of the core when connected to the power supply after installation. At the same time, since the host comes with the recommended power, it will automatically set to the corresponding power after installation, and you can also make adjustments on this basis (the power increase has the highest limit, cannot be achieved80WFull export).

Although the smoke does not exhibit a very low resistance, the amount of smoke is still very sufficient. In terms of taste, it can be said to be quite surprising, because the taste is particularly sufficient, and at the same time, under the guarantee of high concentration, it can also bring out the layered taste of the tobacco oil. It is not common to take into account both.

1.2The core of Ω should be used more for salty oil or high-concentration oil. However, because the matching between the machine and the core is still at the setting where the lungs are fully inhaled, the amount of smoke is still high, and although the taste is not bad, if you want to compare it with traditional salty oil pumping equipment, there is still a gap. After all, this is a question of the overall setting direction.

As for this custom mode, you can see that it has10The corresponding time unit for the gear setting function is not clear, and since the output in the power mode has been done very well, this function is more or less just a icing on the cake and is not often needed in ordinary times.

To sum up, let's take a look at this one brought by the HeatSNIPERThe sniper suit is responding to the market where heavy smoke is beginning to rise again, and the equipment used to deal with various heavy smoke settings can be said to be extremely competitive. In addition, it seems to have a #p#pagination title #e#0.17Although I didn't try it in this review, I just look at it0.6Judging from the performance of the Ω core, it must also perform well.

As for the shortcoming, I think it may be the use of heavy smoke that causes a large amount of condensation to remain in the place where its oil tank drip nozzle is connected in a short period of time, requiring frequent wiping.