Review of the New ASVAPE HITA Kit: A Collision of Nostalgia and Trends!

The mechanical rod is the ancestor of e-cigarette power supply equipment. This kind of equipment has no reservation and matches all types of equipment.The fancy gameplay of DIY atomizer has become a concern in the hearts of the older generation of players.

Nowadays, the market is dominated by various pre-filled small cigarettes and oil-filled equipment. The convenience of use and audience level are not comparable to those of the past.

So is there a product that can resonate with people's feelings and have perfect convenience? What we shared todayASVAPE's latestHITAMaybe the suit can give the answer.

Actually, looking backOver the years, the ASVAPE brand has produced a small number of products. Except for Vulcan, they are basically designed mainly with traditional e-cigarettes. Now, this product is launched at such a difficult time at home and abroad.HITASuits also definitely have certain strategic significance.

After unpacking, there are various matching replacement accessories, finished cores, charging cables and a trendy lanyard that match the suit itself.PS: The manual still does not contain Chinese. Bad review!

according to rumorsASVAPE internally providesHITAA name called Flashlight has been arranged. Judging from the above picture, its size is indeed a little bit similarEDCThe smell of a flashlight and the appearance similar to a mechanical rod are also a tribute to feelings.

?

The knurled patterns at the upper and lower ends of the shaft and the matte treatment in the middle section match a very excellent texture and feel. Separate buttons withPrompt function of LED lights, where green light is power>50%, white light is electricity <50%, there are some warnings of abnormal conditions under the red light state, so the only way to operate is to press continuously5It is simple and brainless to switch off and ignite the machine.

The smell of charging interface at the bottom of the shaftTYPE-C interface, built-in battery is1000milliampere, coupled with the structure of multiple built-in protection chips, also makes its diameter25mm。

There are two left and right air inlet holes on the top of the shaft. The three electrodes in the middle and the surrounding magnets correspond to the installation and use of the atomizer, but its magnetic attraction is not particularly strong.

#p#Pagination Title #e#

Note that the atomizer also has a limit structure, which can prevent the atomizer from rotating endlessly and the opening and closing of air holes. Please pay attention when installing.

The overall length of the atomizer installed is92mm, for those who have no idea of the size, please see the picture above and ordinary18650The comparison of batteries can be seen.

?

The atomizer should be selectedMade of PEI material, transparent crystal yellow can echo the shaft for a very excellent visual effect. Hidden behind the huge silicone plug on the side is a huge oil filling port, which can be filled without pressure for all kinds of fancy things.

The original factory providedTwo drips of different size airway, both510Specifications. Seemed to deal with two finished cores andRBAThe data is used differently, but the actual experience is not much different.

The separate sealing ring at the bottom has magnets that correspond to the detent on the atomizer.

You can take out the independent electrode parts below by pinching them with your hand. Since the core is sealed with the two rubber rings at the bottom, non-destructive core replacement is not supported.

Regarding the electrode, it must be noted that the electrode is only fixed with a silicone ring when installing or cleaning.，Very easy to fall out! If such a small part is lost, you can only buy it twice。Remember to be careful, careful!

The two finished cores configured at the factory are0.5Ω net core and1.0Omega's regular core. There is no need to make any adjustments when replacing the two, and the chip on the shaft will automatically match power to them.

useThe 0.5Ω core can match various types of smoke fluids with large smoke, and its smoke performance is good for small size and low output designs. Of course, you cannot compare with orthodox large smoke equipment. The taste is sensitive to sweetness reduction, and other flavors are not easily overshadowed by it, so it can basically adapt to various flavors of tobacco oil. However, if you want to get a relatively full impact, it is more recommended to use #p#pagination header #e#6mgSmoke oil. The air inlet hole is suitable for opening to one-third or one-half.

?

The 1.0Ω core is obviously used to match the use of nicotine salt in tobacco oil. After testing, it is more focused on equal to or less than35mgConcentration of salt oil. In terms of taste experience, it can accurately bring out some complex flavors in tobacco oil that are not easy to detect, which is an advantage. However, it may be that the resistance is low or the output is slightly higher. The matching between the two seems to be slightly lacking, so its smoke volume will be relatively large, and the feeling of hitting the throat will be much reduced, which will cope with some of the problems.50mgThe salt oil is also pressure-free. Be aware that this does not mean that it is bad, but that it can be optimized a little more.The opening of the intake air is recommended to be one-fifth.

Another thing about HITA that can be regarded as feelings or highlights is itsRBAKit, but this kit needs to be purchased separately.

You can see here that it comes with a separate wire making table, which can be directly installed on the pole to complete the wire burning step. I want to like this.PS: Note that the oil guide hole here has4Well, its aperture is very small.

?

The design of the electrode table is a relatively conventional misaligned structure. There is a small slot on the outside of the electrode column, which allows it to play a good role in blocking when installing the heating wire. Like it.

Put the coil on and place it on the pole to complete the wire burning step.

It has been said beforeThe diameters of the four oil guide holes are very small, and the place pointed by the arrow is its hollow oil groove.DIYPlayers with insufficient experience recommend cutting the cotton as thin as possible, and at the same time, it is better not to let the cotton feet fill the bottom properly. The old driver pretended that I didn't say this.

The selection of data is recommended due to internal compartment space and airway heating volume28G silk match2.5The circle diameter will be relatively safe. The taste is more suitable for some with strong and complex flavors35mgThe above salt oil has a surprising performance, but relatively it has a weaker interpretation of oils that are single and have weaker taste and intensity. So based on the above, it is a relatively oil-picking type.# p#pagination title #e#

on the wholeThe HITA Flashlight Set can bring a higher level of experience, from heavy smoke to the popular nicotine salt tobacco oil.RBAThe excellent structure of the kit and the addition of independent wire-burning components can also make its gameplay and service cycle longer, making it a device worth purchasing.