HNB Home · Heated Tobacco and Vaping Industry NewsChinese
Home Vaping News Anlto Squonk Box Mod Vaping Device Review
Vaping News · [db:关健字]

Anlto Squonk Box Mod Vaping Device Review

This time I’m sharing my experience with a squonk box mod called Anlto. No review is completely objective, so the following is only my personal, non-professional opinion and subjective impression, for reference only. I was lucky enough to get my first squ

This time, I bring the experience of using the bottom note box named Anlto.

No review is completely objective, the following reviewsisPersonal unprofessional opinions andsubjective feelings, for reference only, if there is any similarity, it is purely a coincidence.

I am lucky enough to get my first bottom note box in my life. The Anlto mod of the Arctic dolphin. I don't know what the official Chinese name is. I'll personally translate it into an Anita bottom note box...

Picture above, packaging:

The black box has the appearance of the product that comes into view. The back is the product model and parameters. It is more detailed. There is a slogan on the front and bottom of the back: This product contains nicotine and is easy to be addicted. When I saw the slogan, I thought it was a suit or a gift of cigarette oil or something... However, after opening it, I realized that I was thinking too much.

The inside of the box is an all-white box with a large contrast color. The colors on the side indicate three. The left is the material, which is aluminum and plastic. The circle on the upper right is the color of the panel. The bottom is the color of the main frame. The color of the panel does not show anything. The box color ABS version has black gray and silver.

So... the question arises, what color did Xiaohua get? Solution: Let Xiaohua get the box =X, X=ABS+●+SILVER, Answer: Xiaohua get this plastic blackboard and silver frame box.

Interior:

The main unit body, a battery kit, a 7ml squeeze bottle, instructions, warranty card, USB cable, and a replacement panel without squeeze function are gone.

?

Host:

As Xiaohua's first bottom injection box, I wasn't very good at using it when I first got it... So I was full of strong curiosity and freshness. I also specially consulted other old timers. During the consultation process, I found that most of the bottom injection boxes did not have chips. This Anita comes with a 0.96-inch monochrome screen with a low refresh band, so it is a single-cell bottom injection box with a chip, and the functions of the chip are very powerful. Not worse than the current non-undercut boxes, there are four patterns first: #p#paging header #e#

Power, temperature control, curve, mechanical, there are all the modes that should be available. Secondly, in the corresponding sub-menu, the strength of the power mode, the type of silk, the display mode of degrees Celsius and degrees Fahrenheit, the screen-off time, the brightness of the screen, and the statistics of the number of mouths. These functions are also available. Finally, in power mode, you can see the voltage by directly adjusting the power. Many friends should like this very much...

The maximum value of a single battery is 100W, and the minimum parameter supporting a resistance of 0.06 is completely enough for daily use, even surpassing ordinary single battery boxes. It's just that... this single battery is often used at 80w, and battery life is a problem... It's a little more expensive than a pole. However, the manufacturer may have this consideration, so the battery can support 21700, 20700, and 18650. It should be better to change to a thicker battery. Unfortunately, Xiaohua didn't have it, so Xiaohua later used bypass mode. Although the burst effect is not as good as the 80w push in power mode, it is basically enough to match the pole.

Feeling:

Not bad, the experience was very good. After using it for a few days, the RTA and pole in Xiaohua's home were basically idle. Hey, tell me what Xiaohua wants to express:

1. It has a good grip and has no edges and corners. However, Xiaohua feels that although the plastic material of this ABS is light, it is a bit top-heavy after installing a larger atomizer (the reactor used by Xiaohua). If it was an aluminum version, it might be better (unfortunately it was not drawn), the overall workmanship is still very rigorous, and the feedback feeling of the buttons with uniform gaps is completely OK.

2. Both sides of the panels are magnetic and can be disassembled and replaced. In the later period, if manufacturers come up with various limited edition panels such as Gucci and LV, local tycoons will be able to give a play.

3. The squeeze bottle seems to be a little soft (I'm not sure what other bottom injection boxes look like). Always be careful when disassembling, disassembling and opening and closing the lid to prevent the oil from being pinched out, especially when the lid is filled with oil. The bottom is soft and the top is tight and you can't squeeze it hard... I feel that this lid would be better if it wasn't threaded, and we should change it to a more convenient way to cover the lid (Is this a common problem of squeeze? Not sure what other underfill boxes look like. X2)

4. When you want to remove or install the squeeze, you must take out the battery first, otherwise it will be difficult to start...

5. Battery tray... Focus on this. The springs of the positive and negative electrodes of the battery are too hard, abnormally hard. At first, the 18650 battery case couldn't fit it in even if I tried hard. Later, I studied that I had to press the negative pole down and put the battery in parallel to fit the battery in, but... when I took it out, it was easy for the battery skin to be damaged:

Looking at this terrible situation, Xiaohua later invented a posture to protect the battery... that is...:#p#pagination title #e#

Put the battery accessory on the positive pole, then press the negative pole down, and then pay attention to keep the battery and the host at a parallel angle to put the battery in... This way, you can put it into the battery slot without effort, and the positive pole of the battery is taken out. You won't be afraid of scratching the battery skin. If you want to buy it, you must pay attention to this tip.

Summary:

Time is like XX, you will always have it when you squeeze it. Tobacco oil is like XX, you will always have it when you squeeze it (what is XX? Self-brain tonic), what is it difficult for RTA to make cotton, what is oil leakage, what is it inconvenient to refuel in RDA, what is low in single battery life, none of them exist. With Anita, you can suck it!!!? Haha,

It's far away...

Anita Xiaohua, the little Arctic dolphin, thinks it is a good squeeze box. She carries a portable and adapted bottom-injection RDA atomizer. After using it for a few days, the RTA and pole at home are basically idle, and the chip functions are also Not perfunctory, it is completely enough as a single electric box. Recommend it to friends who want to buy a bottom-deposit box recently!

Okay, that's how Anita feels using the bottom injection box! If you are interested, you can go buy or leave a message to exchange questions. You are also welcome to put forward valuable suggestions and opinions, and of course, praise ^_^

H
HNB Editorial Team

HNB Home focuses on heated tobacco and vaping industry coverage, including product reviews, brand information, and global market updates.