TEEMO Prebuilt Coil Atomizer Experience
Here is today’s featured product: the TEEMO prebuilt coil atomizer with rebuildable coil support. The side of the box provides detailed product information. It uses food-grade 304 stainless steel, was designed by two foreign designers, measures 22 x 44mm,
Let's invite our protagonist today.TEEMO Finished Nebulizer with reconfigurable atomizing cores
There is a detailed introduction on the side of the box food grade 304 stainless steel Designed by two Gweilos size: 22×44mm Oil storage capacity: 2.5ml Recommended power: 25W Inside the package: A TEEMO nebulizer An atomizer base A spare atomizing core A spare glass bin A pack of spare parts After the introduction, I can't wait to open my bud
Down-draw packaging, the packaging method is like perfume.
The upper spare glass chamber, spare atomizing core, and atomizer seem to be screwed on it. ? Conscience, aluminum alloy base is super affordable and super considerate. Is there any wood? The laser-engraved logo is rolled up and down to prevent slip. Is there any surprise? ? As for the appearance of the atomizer, I quite like it TEEM and ULTIMATE (top cover) with organic engraving A trapezoidal circle of decoration, filled with black paint. formed its design elements Four air inlets at the bottom, grooves are milled on the air inlet adjustment ring to increase adjustment resistance Adjust smoothly and without jams The bottom of the extracted package is a package of accessories, instructions and a warning card ? Spare atomizing core is laminated with details in place, bonus points
Dismember it directly with your hands, the PEI nozzle cover
Suction nozzle, top cover, atomization chamber, finished atomization core, base, air intake adjusting ring
?
The information on the finished atomizing core is very comprehensive
Clapton coil
Nichrome #p#pagination title #e#
0.55 ohmic
25W
The two electrode columns at the bottom are also relatively large
The entire atomizing core is one circle larger than my Parrot 2 atomizing core
The anti-explosion oil net is quite wide and thick. I received it the day before yesterday and used it for 2 days to write this experience report. In the past two days, I have only heard the sound of frying oil, but the oil has never been fried in my mouth. The interior of the atomizing core will be described in detail later ? The bottom electrode screw cannot be adjusted and replaced. It should be stuck There are many protruding electrode pillars, and there is no pressure on the pole My number is 0830 The front electrode table occupies almost the entire base and is connected to the finished atomizing core without pressure. ? After using it for two days, there was still some condensation on the base electrode table. Others said that there would be smoke leakage. I haven't encountered it in two days of use. It is recommended to check whether the cotton at the oil inlet is blocked before use. ? The following personal views are commented by the godsLet's first talk about the advantages: this atomizer is small and exquisite in workmanship, all parts are handled in place, no edges and burrs, and the rubber ring size is accurate.Use smooth and non-stuck. No condensation, no frying oil, and no leakage. Let's talk about the slot point again: Continuous suction generates a bit too much heat, and the nozzle is a bit short for me. ? You think the experience report is over? ? Said that the atomizing core can be rebuilt, the following is the key point (It doesn't matter how much traffic you have, is that an experience report?) After two days of use, I tried 4-5 types of tobacco oils There are American oil, Malay oil, domestic oil, and homemade oil Transverse finished core has a great impact on suction resistance Logically speaking, for the four air inlets of the base, the large air inlet cabin should have weak suction resistance However, in actual use, this atomizer and finished core can only be inhaled lightly at most. Also mapped to a resistance of 0.55 ohms #p#pagination title #e# However, the actual taste of the finished core with a semi-light taste is relatively light The atomization of cool oil is more prominent, but others are desalinated I also tried an alien stone array with 11mg nicotine I feel dizzy when I drop this oil Usually I put it in the Nautilus 2 and suck it in small sips. The taste is like the smelly tar from smoking a cigarette And the throat strike was obvious But I can breathe this oil lightly with TEEMO The aroma of roasted tobacco is clearly atomized Although it still feels like it hits the throat, it is much lighter compared to Nautilus 2. Other tobacco oils are basically diluted, with an obvious apple ice flavor and a very light apple flavor However, I'd better say less about the taste. After all, there are hundreds of people who eat it. These are just some of my personal experience ? Start dismembering the finished core After two days of use, because I pump faster Condensation and the smoke oil of Shizhen have made the cotton miserable However, the carbon deposit on the heating wire is not very serious If it's A1 Clapton, basically, the malay oil will have to be quenched after a day of carbon deposition. The coil is welded with the stitching, probably because it is afraid that the rubber ring will not be able to clamp the Clapton coil tightly.
After washing it all, I plan to use rhino's ni80?? 24ga heating wire to reset the finished core The original Clapton coil is 0.55 resistance, 2.5 turns diameter, 5 turns, loosely wound I tried 24ga this time, 3.0 circles diameter, 6 circles, close winding Although the oil won't fry in my mouth, I still don't like the sound of frying oil ? The reset of the finished core is that it is difficult to complete the burning of silk and removing the cotton flavor But it doesn't matter. I'll use pliers to hold it on the gas stove and burn it, as long as it doesn't get stuck. ? Hahahaha, I'm afraid I can't control the height of the coil well As a result, the cotton could not block the oil inlet and leaked oil, and the cotton directly passed through the oil inlet. In fact, I failed the first time because I placed the coil directly before putting on the rubber ring It's really difficult to control this coil. The rubber ring is stuck on and the thread is running away. The nebulizer does not display when connected ? The second time, I clip the coil and adjust the height of the coil However, with this kind of cotton threading method, the coil will basically not touch the anti-explosion oil net It should be noted here that the connection between the negative electrode and the outer cover of the atomizing core Connection of positive electrode and gold-plated electrode column
Cut off the extra thread, and basically all the work of resetting the atomizing core is cotton #p#pagination title #e# I choose a little more cotton, just like GTA, to ensure that the oil inlet is firmly blocked Resistance 0.36 ? Come on, moisten the core. After all, the finished core still needs to be respected.
