LQT RDA Dripping Atomizer Vaping Device Review

A good rider fell from a horse, a good swimmer drowned in the water, a good drinker was drunk by wine, and a good fighter died by killing.People who are good at e-cigarettes are lazy.

Everyone is inadvertently pursuing minimalism,Often after getting familiar with something,E-cigarettes must also be among them,

From the original extreme strictness,Lay down requirements layer by layer,Once upon a time, for beautiful coils,You can go around it three times five times,

Now I care more about convenience,But there's nothing wrong with that..Maybe things should go in this direction,

Today's conversation isLQT RDA,Have a decent appearance,A simple and easy-to-use atomizer.Can it satisfy your laziness?.

?

We'll see what happens next….

LQTCertain functional modifications have been made to the appearance,

Concave design corresponding to top cover and base,In addition to increasing resistance, making daily use easier,It also has a certain beautification effect.

24mmThe diameter should be considered as the current mainstream size,Works with most mechanical levers,

Including drip nozzlesLQTheight of32mm,More common heights.

The product name #p#pagination title #e#is printed on the cover and the drip nozzleLOGO,A few small embellishments,effect is not bad

?

LQTAdopt classic four-stage structure,It is relatively simple and convenient for daily use and cleaning.

 

810drip lip,Although it looks longer,but after installing,It's no different from a normal drip mouth.

 

Right angle design on the edge of the drip nozzle,It has been recognized by everyone since the mad dog era,

 

Effectively prevent condensation from flowing directly upstream.

 

But the corners here are convex when viewed from the outside,Match the drip nozzleLOGOidentification,

 

In terms of appearance, it is a bonus,The entrance has a slight edge,Personally, I don't feel very comfortable,

 

But now it's a place where everyone wants beauty,A big era when even johns don't like to wear, Who cares~~?

?

?

?

Common atomizer top cover,or right angle#p#Pagination Title #e#,or it's going to come up and make an arc,Try to control condensation.

 

butLQTthe top cover of,is interesting,Large opening at the top,Gather and shrink the bottom.It can be said to be a very standard funnel shape,

 

Looking at the top,Cooperate with the design of the drip nozzle,The condensation slides back smoothly,At the same time, without compressing height

 

Let the smoke reach our mouths faster,The impact on the taste is self-evident.

 

Around the inner funnel,provided with a groove,After subsequent actual measurement,Condensed and fried oil,

 

A certain amount will accumulate here,effect is very good,You can draw a red circle here,Give an "A".

 

There is also an obvious drawback to doing so,The funnel extends until it almost touches the electrode column,If you fry it in oil, it can be explained by the words sour and cool

 

But the gathering mentioned earlier,The possibility of frying oil inlets has been largely avoided,Because it's almost close to the electrode column,So ki

 

There is no angle entrance. It can be said that #p#pagination title #e#"Life and death"single thought,ifLQTDidn't do this gathering,Maybe it is"Die"…

 

Of course, there's a tip,if you will,Pour the oil directly in from the drip nozzle,Center red heart,You can inject oil directly.

?

?

?

The base is double pillars and large double holes,I personally prefer the double-pillar structure more,

 

for me,Adjust the center of the coil,It really conflicts strongly with my laziness.Maybe this should be accompanied by my laughter

 

Currently, fancy heating silk is rampant,LQTThe large holes are enough to cope with the current market conventional silk filaments,

 

Two huge linear electrode screws,It should also win the hearts of many people.

 

LQTThe base is not very deep,Fortunately, the adjustable air bar position is higher,Double rubber rings with good fit,You can inject more oil appropriately.

 

The electrode is obviously convex,Independent numbering at the bottom andCELogo and so on,#p#pagination title #e#are also readily available.

?

?

Installing the heating wire is relatively simple,The wide wire holes give us enough operating space,

 

Whether it is single coil or filament, it is easier. Just cut the silk feet to length,Fix it with large screws.

 

The top cover rubber ring is moderately tight,Easy to remove,But it won't come loose,That's good.,Adjusting the top cover will also make the air intake different

 

changes, As for how to find the most comfortable balance point for your taste,It depends on the heating wire data.

?

?

Because I am a famous addict,Coupled with the too low top cover,I prefer a single coil,Otherwise, when I suck in silk,,

 

Maybe after the funnel is heated, it will directly direct heat above the top cover..

 

The position of the air hole is high when installing the heating wire,Pay attention to the coil height,It is better to make the airflow correspond to the heating wire.

#p#Pagination Title #e#

 

It was mentioned before,Oil can be filled directly from the drip nozzle,The results were not ideal after testing,Don't do it like this.

?

?

LQTThe overall situation is still satisfactory,as a basis,overall qualityOK,Better face value.in daily use,It's also easier to fight

 

of technology, Simple classic structure,Even novice players,You won't scratch your head when using it,The threshold for getting started can be said to be very low.

 

Although I personally prefer monofilament,But whether it is space or silk control,LQTThey all support fancy heating wires. Equipped with fully open air intake

 

state,It should also perform very well in terms of smoke volume.

 

for me personally,LQTComply with simple,convenient,stable,face value,Coexisting usage needs,Of course, if the drip nozzle can design the corners

 

Cancel is even better #p#pagination title #e#… As for whether it is suitable for you.Let's see how the officials measure it for themselves….