Arctic Dolphin Anita 100W Squonk Box Vaping Device Review

Enter the content of this sharing below↓↓↓

First, look at the three outer layers of the package, the first layer of transparent plastic packaging (torn), the second layer of pull-out carton, and the third layer of classic Tiandi Box.

From Figure 1, you can see that the product name, the 3D outline of the host, the Logo of Arctic Dolphin and the warning slogan are printed on the front.

Three labels are attached to the bottom, indicating the color of the panel, the color of the middle frame, and the host material.

Mine has a brown panel, a dark gray middle frame, and an ABS plastic material.

This console has 6 color panels, 3 color middle frames, aluminum alloy and ABS plastic, and can be freely combined and matched.

Then take a look at the main data of this console:

?

Temperature control range: 200-600℉

Power range: 5-100W

Power mode resistance range: 0.1-2.5ohm

Temperature control mode resistance range: 0.06-1.0ohm

Screen: 0.96 inch OLED

Working input voltage: 3.1-4.3V

Maximum output voltage: 9V

Maximum output current: 40A

Charging input voltage: 4.75-5.5V

Charging interface: micro USB

Protection features:

short circuit protection

#p#Pagination Title #e#Low power protection

High/low resistance protection

overheat protection

features

Support single power in three specifications: 18650/20700/21700

Support resistance correction

?

After opening the box, you can see that the mainframe is still covered in a plastic bag.

Below is a sponge support for fixing shock absorption,

The packaging is quite secure.

List of items in the box: main unit, 7ml oil filling bottle, 18650 battery casing, additional panel, USB data cable, user manual, warranty card.

Front ↑↑↑↑

The hole in the lower left corner is used to squeeze the oil injection bottle. Maybe my hands are bigger, so the hole diameter feels a little small.

The front panel is fixed with magnetic attraction, which can be replaced with different colors. At the same time, it can also be replaced with additional panels and used as a single power host.

Back ↑↑↑↑

The back panel is also fixed with magnetic attraction and can be replaced at will.

#p#Pagination Title #e#

Side ↑↑↑↑

Buttons, screens, and data interfaces are all concentrated on the left panel

The buttons are made of plastic, and the feedback is good.

Top ↑↑↑↑

The 0 interface is designed on the top left side, so individuals will prefer a symmetrical center position,

The interface is slightly higher than the frame to prevent the atomizer from locking, and is engraved with an oil guide groove installed in the center.

After taking apart the panel, you can see that the interior design is simple and neat, and the positive and negative electrodes of the battery are clearly identified.

The front panel and back panel have a fool-proof design and will not be mixed.

The top of the oil filling bottle is connected with a stainless steel lid,

The oil guide pipe is long enough to reach the bottom of the oil bottle,

The bottle feels very soft when pressed.

The attraction force of the two magnets on the panel is enough, at least it will not fall off even if it is shaken or shaken hard.

For using the 18650 battery, the battery bay is a bit deep and is not easy to install.

The size of this mainframe: 91*57.46* 30mm

Although it is a little fat, because it is light and the coating of the panel feels good,

The overall grip is quite good.

It is common to press the ignition button 5 times in a row to turn the machine on and off,

The first thing to enter is power mode. Pressing the ignition button three times in a row can switch to temperature control, custom curve and bypass mode.

Press and hold the + and-keys at the same time for 2s to enter the settings menu, the ignition button confirms options,

You can adjust the power output mode, temperature control heating wire material selection, temperature unit, suction time, screen brightness, suction number, serial number, etc.

Press and hold the ignition point and the-key at the same time for 2s to enter the resistance value correction menu.

Press and hold the ignition point and the + button at the same time for 2s to lock/unlock the host.

I won't go into detail on other specific operations. If you are unclear, you can check the entire E-language manual, haha.

Overall, I personally feel that this is a standard console.

Although the ABS plastic material does not seem to have a high B grid enough, it has the lightness of the body and the touch of the coating.

Although he is a little fat, he can take advantage of all three electric batteries to enhance battery life.

Although it does not have the characteristics of showdown skills, it is fully functional and simple to operate.

Therefore, there will be no troublesome problems when using it, and it is very good to be stable and durable.