RTA with an RDA Experience – FREEDOM Vape Atomizer
This is where the inspiration for the free FREEDOM atomizer came from, A character full of technology, future, machinery, science fiction
The outer packaging is quite big.Simple white rectangular carton,
A picture of the atomizer is printed on the front.
On the back are the packaging instructions inside the box.
This atomizer is designed and produced by Wangtefu,
#p#Pagination Title #e#Dudu chose Wangtefu,
It should be because you have taken a fancy to the manufacturer's superb craftsmanship.
Opening the packaging box, a DOVAPE LOGO card and a FREEDOM nebulizer instructions appeared.
Sure enough, it was DIY. The atomizer had to be assembled by yourself. Fortunately, the order was marked 1, 2, 3, 4, 5.
Otherwise, a novice would definitely be confused when getting it.
Remove the fixing cotton used to fix the atomizer accessories, and there are three small black bags at the bottom, which is in line with Wantefu's previous style.
Inside the three accessory packages are rubber rings, spare screws, three three-core claptons, a screwdriver, and cotton.
Three filaments will be enough for a long time on the FREEDOM atomizer. After all, it is a single shot.
The base of the atomizer is designed with double columns and four U holes.
The open U hole greatly reduces the complexity of making wires. After the screws are removed,
Put the heating wire directly on the U-hole and it will be OK.
The diameter of the U-hole is 1.5mm, which is enough to be compatible with common filaments on the market.
Since it has double columns and four U holes, it must be a person who is accustomed to silk making who has considered forward winding and reverse winding.
You can choose to fix with 1 3 holes or 2 4 holes.
Very convenient silk making design.
After putting on the silk, it is also very convenient to cut the silk feet.
Those who watch excessive videos should know that
You cannot install the air intake adjusting ring when making wires.
Otherwise, it would be very inconvenient.
After all, the intake regulating ring is no longer a regular ring,
Instead, an inverted trapezoidal design was made.
Cotton holes, or oil guide holes, are also of unconventional design.
It's no longer a crappy little oil guide hole, but a big semicircular hole.
Stuffing cotton should not be said to be putting cotton,#p#pagination title #e#
You just need to put the cotton along the semicircular hole and put it to the bottom.
This visibility always gives you a perfect fool's experience in a convenient and fast way from the player's perspective.
After making the wire, be sure to check whether the heating wire is against the flue.
If you hit it, it's a short circuit. It's better to play with a box, but if it's a pole, it's dangerous.
After all, the RTA structure of this atomizer experiences the feeling of an oil-dripping atomizer.
Super large oil filling holes are made on both sides, which can be compatible with any oil filling bottle and dropper.
A designer who pays attention to detail is always doing something more detailed.
Closing the air inlet also allows you to see the name of the atomizer FREEDOM!
Free FREEDOM atomizer, inspired by FREEDOM,
The design adopts upper and lower forward trapezoidal shapes, full of mechanical appearance;
Making silk is particularly simple and easy to use; it is also compatible with the structure of positive and negative silk;
Although the oil storage volume is not large, the top cover is particularly convenient to remove and can be removed by only turning half a turn.
This greatly reduces the pressure in the warehouse and eliminates oil leakage and oil leakage caused by excessive oil pressure;
The short airway, as an RTA, gives you an RDA experience;
As well as various color accessories introduced later, it has increased the adaptability of free FREEDOM.
You can match poles, you can match stabilizing wood equipment, you can match……
Feel free to use your free imagination
