Practical Guide

Recently, I received a question from fans backstage about oil leaks from the atomizer

Xiaobian decided to present a dry article

Answer the "difficult and miscellaneous problems" about nebulizer

First of all, let's popularize science

Although there are many styles of e-cigarettes

However, their basic structure generally consists of three parts:

Cigarette rod, atomizer, cigarette bomb

electronic cigarette atomizereither by airflow sensing or by pressing buttons.

Make the battery work and connect the atomizer

cause heat and evaporate tobacco oil

Produce atomization effect, achieving effects similar to smoking

?

#p#Pagination Title #e#

The atomizer is the most important part of steam smoke

Generally divided into three categories

Core change type, oil drop type, self-made type

? ??

▼

? ? /The following is about the atomizerTop ten issues and responses/

?Q1: The atomizer components are locked and cannot be disassembled with bare hands?

?

? causes： ?Excessive force during installation, excessive negative pressure in the oil tank, slippage caused by sweat, etc.

?

#p#Pagination Title #e#? Solve tips:Choose the most common one in the kitchenrubber gloves, the method of use is very simple, you don't have to wear it on your hand,Wrap two gloves around the equipment in suitable places, and then rotate it hard to open the locked equipment.

This method can achieve an efficiency of more than 90% for ordinary equipment locking, and will not cause scratches on the surface of the equipment, let alone damage the equipment. If you can't even open it with rubber gloves, you can only prepare for violent dismantling by bench vise...

?Q2: Is there an oil leak from the atomizer?

?

? Reason for occurrence:?The atomizing core or rubber ring is damaged, and improper oil injection and use are carried out.

? Solve tips:

1. Finished product atomizer：The top oil-filled atomizer turns off the air intake when filling oil. Do not blow hard into the atomizer when using it. Pay attention to check whether the atomization core and rubber ring are intact and replace them in time. Pay attention to controlling the amount of tobacco oil added when moistening the core.# p#pagination title #e#
2. DIY atomizer:The top oil-filled atomizer turns off the air intake when injecting oil. When using the oil-storing atomizer, do not blow hard into the atomizer. When making the atomizing core, the amount of cotton is controlled. When dripping oil, the oil-dripping atomizer controls the amount of tobacco oil dripping.

?

?Q3: There may be frying oil during use of the atomizer?

?

? Reason for occurrence: ?The output power is too large, the atomization core absorbs too much smoke oil, the impact of condensate, etc.

?

? Solve tips:

1. Finished atomizer:When moistening the core, pay attention to controlling the amount of tobacco oil added, reasonably adjust the power of the output equipment, and clean the condensate in the atomizer in time.# p#pagination title #e#
2. DIY atomizer:Reasonably adjust the output power of the equipment, clean up the condensate in the atomizer in time, and select a heating wire that matches the atomizer image or a finished coil to use when making the coil.

?Q4: Change in resistance used by nebulizer

Will excessive changes affect the use of nebulizer?

?

? Reason for occurrence: ?Carbon deposition on the coil, damage to the atomizing core, unstable installation of the atomizing core, etc.

?

? Solve tips:

#p#Pagination Title #e#1. Finished atomizer:Check whether the atomizer and the main unit, the atomizing core and the atomizer base are stably installed. Replace the aging finished atomizing cores in a timely manner.
2. DIY atomizer:Check whether the atomizer is stably connected to the equipment, check whether the coil is stably fixed on the electrode column, check whether the coil is damaged or the rubber needle is in contact with the inner wall of the atomization chamber. If there are any of the above problems, the coil needs to be adjusted or replaced in time.

Q5: The atomizing core burns or catches fire

?

? Reason for occurrence: ?The output power is too high, and the coil heating is uneven.

?

? Solve tips:

1. Finished atomizer: There will only be burning. This situation is basically that the output power of the main machine exceeds the bearing range of the atomizing core. In order to ensure the normal use of the atomizing core, attention should be paid to the adaptation power of the atomizing core. Use within the range. At the same time, if the VG of the tobacco oil is too high, the tobacco oil conduction speed of the atomizing core will not meet the use requirements, which will also cause the atomizing core to burn. Therefore, when using the finished atomizing core, it is necessary to pay attention to controlling the frequency of use and selecting the appropriate tobacco oil for use.# p#pagination title #e#
2. DIY atomizer: In addition to exceeding the tolerable output power of the atomizing core, another reason why the DIY atomizing core catches fire or burns is that the coil heats up unevenly. Before installing cotton, wire burning must be carried out to make the coil The heating is more uniform.

?

?

?Q6: When using the atomizer, there may be a situation where the mouth is burned?

?

? Reason for occurrence: ?This problem is related to the coil data, the power used, the size of the atomization chamber, and the amount of air intake.

?

? Solve tips: #p#pagination title #e#

1. Finished atomizer: Reduce the output power, increase the air inlet, and replace the heat-insulating nozzle.

2. DIY atomizer: Choose a coil with less heat to use, reduce the power used, increase the air inlet, and replace the heat insulating nozzle.

?

?

?Q7: Will condensate be generated during the use of the atomizer?

?

? Reason for occurrence: ?There is a temperature difference between the smoke and the atomization chamber, external air, etc., which leads to the liquefaction of the smoke.

#p#Pagination Title #e#?

? Solve tips: ?At present, users cannot completely prevent the generation of condensate, and can only process the condensate by wiping it on demand. At the same time, methods such as loosening the ignition button earlier for air suction can also reduce the generation of condensate to a certain extent.

?Q8: How to reasonably moisten the atomizing core?

?

? Operation method: ?Whether it is a finished atomizer, an oil storage or a dripping atomizer in a DIY atomizer, pay attention to the amount of tobacco oil added when moistening the core. If too much tobacco oil is added, frying oil will occur. problem. At the same time, when adding tobacco oil, it must be added at a uniform speed, and it must not be added too quickly to allow the oil guiding cotton on the atomizing core to absorb the tobacco oil.

#p#Pagination Title #e#?Q9: How to correctly oil or drip oil on various atomizers?

?

? Operation method:

1. Finished atomizer: For atomizers with oil filling at the top, oil filling needs to be completed before the oil filling operation to ensure that the atomizer will not leak oil. The finished atomizer with oil filling at the bottom needs to be unscrewed and added to the space between the smoke channel and the glass chamber. After adding, the smoke oil should not exceed the bottom of the smoke channel.

2. DIY atomizer: The oil filling operation of oil storage atomizer is the same as that of finished atomizer. When dripping oil atomizer, it is best to ensure that the atomizer is horizontally placed when dripping tobacco oil, which can ensure that the atomizer will not leak oil due to tilting, and at the same time, it can also allow the atomizing core to uniformly absorb tobacco oil.

?

?

? Q#p#Pagination Title #e#10: What is the role of the air intake of the atomizer and how to adjust the air intake?

?

? Operation method: ?No matter what kind of atomizer, the intake air not only provides the atomizing core with the air needed for atomization, but also helps the atomizing core dissipate heat. If the atomizer passesIf it is hot, the air inlet needs to be adjusted larger. When the intake resistance is too large, the intake port needs to be adjusted larger. At the same time, find the right intake resistance for you, and you can also resist the fog.The improvement in the taste of the chemical is of great help.

▼

Handle and solve small problems with the atomizer in a timely manner

While ensuring the normal operation of the atomizer

will also bringBetter experience