Overseas review — Geekvape Alpha atomizer review

Geekvape has been keeping up with trends, and recently they brought players the latest mesh atomizer device — Alpha. The launch of Alpha aims to allow players to pair it with Geekvape's latest dual-battery mod. The atomizer is made of resin and stainless steel, with a diameter of 25mm and a juice capacity of 4ml.

Alpha features a lockable top-fill system and a new Meshmellow coil made with Egyptian organic cotton. The bottom dual airflow design allows the atomizer to maintain a lower temperature even when operating at high power. I have recently used several mesh atomizers like SKRR, Mesh Pro, and Fat Baby Mesh, and I am curious about how Alpha differs from them.

The atomizer has a refined and minimalist design, with the bubble tank and resin material giving it an excellent visual appeal. It pairs well with the Nova mod we recently reviewed.

Alpha's top-fill design is somewhat similar to the top-fill designs of atomizers recently released by SMOK. When players press the "OPEN" button, the top cap opens, revealing a rubber filling hole. Due to the position of the filling hole, it is relatively easy to fill with a dropper, but using a larger plastic bottle can be a bit tricky.

Alpha also comes with a spare bubble tank, while the rest of the atomizer is made of resin-coated stainless steel. The overall build quality of the atomizer is excellent, which is not surprising.

Last but not least, it features a large-bore drip tip and continues the previous resin color scheme.

Alpha uses a new coil design, which Geekvape calls Meshmellow. They use Egyptian organic cotton instead of the previous Japanese organic cotton. The single coil design is for high power, while the dual coil is suitable for medium power. The top openings of both coils are slightly smaller than conventional mesh coils, which may give them a stronger flavor performance.

The MM X1 single coil has a resistance of 0.2 ohms, suitable for 60-110W power output; the MM X2 dual coil has a resistance of 0.4 ohms, suitable for 50-80W power output.

Last week, I tested the MM X1 at around 75W, and there were no dry hits, leaks, or condensation in the mouth during the test. The X1 has a high e-liquid consumption, but for a 0.2 ohm coil, high power usage will inevitably lead to rapid e-liquid consumption.

The X2 is more suitable for medium power use, with a resistance of 0.4 ohms. Despite being a dual coil design, it consumes less power. Considering the atomizer's 4ml juice capacity, the X2 seems more suitable for Alpha. The O-ring on the coil tends to fall off, so be careful during installation.

Initially, Alpha did not impress me much; the airflow ring was stuck, and I initially tasted a plastic-like flavor, possibly from the resin drip tip or the bottom of the atomizer. However, after opening the atomizer for inspection, both issues resolved themselves.

After that, everything went smoothly. I had an excellent experience with both coils. The X2 produced a moderate amount of vapor at lower power, while the X1 provided a very direct flavor experience. I'm not sure if this sensation is influenced by the Egyptian organic cotton or the atomizer's design.

Overall, Alpha left a deep impression on me, especially when using the X1 at 80W or higher. The coils maintained good performance over a week, and to test their lifespan, I specifically used a sweeter cream e-liquid, and so far, it has passed the test successfully. I estimate the lifespan of these coils to be 2-3 weeks, depending on how frequently you use them.

Since I add e-liquid at least four to five times a day, the top-fill design of the atomizer is very convenient. The atomizer's structure is easy to disassemble and clean, and it features durable O-rings. The comfortable feel and dense vapor I got from the Geekvape Alpha are enough for me to overlook the minor issues encountered with the atomizer.

Players can adjust the airflow by rotating the airflow adjustment ring at the bottom. The atomizer provides a smooth and quiet experience during inhalation, but when the airflow is reduced, the sound produced by the atomizer becomes slightly louder — although not as loud as the Fat Baby Mesh, it is still not quiet. The airflow design of Alpha does indeed affect the heat dissipation performance of the atomizer at high power.

Regardless of the power used, the vapor does not seem to get too hot. Overall, Alpha offers players a very smooth lung hit experience, working well at any airflow setting. I personally prefer adjustable airflow designs with notches, but it seems that this design has not yet become mainstream.

We have a winner. Geekvape takes their work very seriously, and you can tell they have put a lot of thought into their products. The Alpha proves they know where their previous shortcomings were and have worked hard to improve them. They have incorporated some of the best features from current atomizer devices, such as resin aesthetics, mesh coils, and a lockable top-fill design.

In summary, I am very satisfied with the Alpha. Despite encountering some issues at the beginning of use, I would still recommend the Alpha to players looking for mesh or resin atomizer devices. Its flavor performance is very direct, with a huge vapor production, especially when using the X1 coil at high power output. If you are using a single-battery mod, the X2 would be a great choice. What do you think of the Alpha? Feel free to share your thoughts in the comments section of the article.