Upgraded for More Excitement — 1VP-B Titanium Colored Cap

 Since the release of 1VP RDA, this has been the only atomizer I use every day for a long time. The rich and rich taste is really irresistible. No other atomizer can provide such an excellent taste. However, this also brought a serious problem. Because the taste of the 1VP RDA is too strong and overbearing, I use any other atomizer, whether it is RTA or RDA, and it will have no taste when smoking. Long-term experience of the rich smoke has also paralyzed my taste, and the taste of the tobacco oil I smoke has become stronger and stronger, otherwise I will always feel as light as water. Later, I had to temporarily seal this killer, insist on using other atomizers for a while, and then replace it with the 1VP RDA, so that I did not go further and further on the road of heavy taste.

After the release of 1VP MOD, I basically completely abandoned the box and only used the pole for daily use. The smooth and dense taste brought by the mechanical lever cannot be replaced by any pressure regulating box. After using the pole, I used the 1VP RDA very little, not because it did not perform well on the pole, but because the diameter of the 1VP RDA is 22mm, while the 1VP MOD is 24 mm. I have OCD. The pole is smaller, and I always feel awkward and uncomfortable looking at it. I have been looking forward to God A to design a nebulizer that can match the 24mm pole and has the excellent taste of the 1VP RDA until the appearance of 1VP-B.

#p#Pagination Title #e#

Previously, I communicated with God A and learned that the B in 1VP-B means Bullet. Because the shape is taken from the black bullet in Super Mario, it seems that God A is also full of childlike innocence and emotions, haha. I never thought that 1VP RDA could be played like this before. Adding a 24mm cover turned 1VP RDA into a 24mm RDA. Not only can it fit a 24mm pole, but it can also retain the excellent taste of 1VP RDA. Isn't this what I look forward to most in my mind?

The shape of 1VP-B is very beautiful and eye-catching. It is made of pure titanium, its round and lovely appearance, and its dazzling blue-burning process, all of which make people love it. Equipped with a flannel bag embroidered with a steam multi-ohm cloud Logo, it is simple and classy. Before I got the 1VP-B, I made the 1VP RDA long ago and waited, hoping to use it immediately as soon as I received it. I would like to talk about silk making here in particular. In the past, I had always used dual-hair on the 1VP RDA. Although it was equipped with a single-hair kit, I only tried it when I first received it, and then quickly switched to dual-hair. To be honest, on the 1VP RDA, the taste of a single shot is still far inferior to that of a double shot. The 1VP-B is still in the testing stage. I have heard from Lord Douye more than once that on the 1VP-B, a single shot has a good enough taste. Use a single shot with a silk thread and the resistance value is controlled at 0.25 0.3, which will give you the best The taste experience is the same as using double hair on a box. In fact, I was quite skeptical before using it. I don't believe that a cover can be so magical, because I have been playing with steam cigarettes for so long, and I have never experienced that the taste of a single shot can catch up with a double shot on the same atomizer.# p#pagination title #e#

After receiving 1VP-B, I couldn't wait to use it as soon as possible. As soon as I took the first sip, I realized that the pattern was broken in Tucson before. 1VP-B is so magical! The taste is rich and dense. Unlike the concentrated and overbearing 1VP RDA original cover, the 1VP-B taste is softer and has a stronger layered feeling, which can more fully display the various flavors of the compound flavor tobacco oil. The overall intensity will be a little worse than the original cover, but you should know that this is a single shot compared with the double shot. It is already very shocking to reach this level, and you don't have to worry about causing taste paralysis after smoking for too long. On the 1VP-B, you can obviously feel that the smoke oil is atomized more fully, and the smoke breathed out will be finer and thicker. In terms of the amount of smoke, this single shot is not inferior to the original cover double shot. Moreover, 1VP-B will not draw any condensation. I specially tested it all day without wiping the condensation, but I can't draw any condensation at all.

#p#Pagination Title #e#

Before I got the 1VP-B, I always thought that the internal structure of this cover was the same as the appearance. It was just a round dome on a cylinder and a hole. After receiving it, I found that the internal design was very fine. The interior space of the cover was very short, with a large part of the top being solid, and there is a relatively long flue in the middle. This design will have a very obvious compression effect on the smoke, resulting in a rich and dense taste. It is precisely because a large part of it is solid metal that God A gave up the heavy stainless steel material and used titanium, which is much lighter. This pursuit of details once again proves God A's intention in designing.

The processing accuracy of the 1VP-B is also very good. When installed in the 1VP RDA, it is as flawless as the original one, and it is completely impossible to see that it is the cover that is matched at the end. It also has the function of adjusting air intake, allowing you to freely choose whether to open two holes or four holes. After I tried opening two holes, the flavor was further improved, even more intense than the double hair of the original mask. If I made double hair, I wouldn't have imagined it, which greatly increased the playability of this RDA. There is another biggest advantage of using a 1VP-B single shot to save electricity. I use a C6 battery. The pumping frequency is not low and I can use it all day. I no longer have to go out and take a few batteries.# p#pagination title #e#

Having said so many advantages, of course, no product is perfect. I still want to talk about the disadvantages. 1VP-B will have a certain degree of rubber biting, but the package is equipped with two spare rubber rings. In addition, the previous 1VP RDA was also equipped with spare rubber rings, which is completely enough for replacement. Another thing is that the 1VP-B is like all one-cover RDAs. A small amount of condensate will flow along the cover to the bottom of the cover and stick to the pole or box 510 connector. However, since the 1VP RDA base itself is not designed to be one-cover, the lower part of the base There is a ring of stepped protrusions that can block part of the condensate, so this situation is much better than the original one-cover RDAs. If you mind, it's better to clean the condensate after using it for a while. Finally, the shape of 1VP-B is very beautiful on the pole, but it really doesn't look good with a box. No matter how you look at it, it makes it awkward, haha.

#p#Pagination Title #e#

To sum up, 1VP-B can be regarded as the perfect upgrade of 1VP RDA. It not only can better adapt to the 24mm mechanical rod, but also brings a new taste experience, allowing you to get the use of dual-hair with a single shot. Experience, high face value, and save electricity. It is worth starting for every partner who has a 1VP RDA. Even those who did not have a 1VP RDA before are recommended to join one. Equipped with 1VP-B, it will definitely bring you unprecedented surprises. Finally, I would like to thank God A for bringing us one excellent and cost-effective products one after another. We look forward to more and better products in the future, and we will continue to support it as always!