OVALE EMODE PRO Atomizer Review
OVALE EMODE PRO atomizer review: when choosing an atomizer, experienced users often prefer models with RBA (Rebuildable Atomizer) functionality. These atomizers allow users to rebuild their own coils, significantly reducing long-term vaping costs. Well-kn
OVALE EMODE PRO Atomizer Review: When it comes to choosing an atomizer, experienced users tend to prefer those with RBA (ReBuildable Atomizer) capabilities, as these allow for self-rebuilding of the atomizer core, significantly reducing the cost of using e-cigarettes, such as the well-known Five Chess and KF5 models. However, these types of atomizers usually involve complicated rebuilding processes, and the lifespan of homemade coils is relatively short. The selection of coil parameters and the amount of cotton can be challenging for newcomers, and carrying a toolkit while traveling can be cumbersome... This makes RBAs far less convenient than pre-made atomizer cores, limiting their usage to some extent.
OVALE has been striving to break through the usability bottleneck in RBA optimization. This summer, they launched the EMODE RFA, which amazed users with its simple rebuilding method. Half a year later, OVALE has introduced a new product that further simplifies the rebuilding process based on the EMODE RFA, taking RBA usability to another level.
The EMODE PRO retains OVALE's signature push-cap oil filling system and adopts a reliable upper airflow structure that minimizes the risk of leakage. Its most innovative feature is the NC heating element packed with cutting-edge technology, allowing for quick replacement of the rebuildable core with just two screws, with a single piece lasting over three months. The oil-wicking cotton does not need to be threaded through the coil; it simply needs to be laid flat on the ceramic base, allowing for a replacement operation in just three seconds. Regular use only requires periodic cotton replacement.
This innovative and technologically advanced atomizer has piqued my interest. Join me as we delve into today's EMODE PRO atomizer review with equa!
【Packaging and Parameter Testing】
The EMODE PRO comes in a very intuitive crystal-clear box packaging, allowing a direct view of the EMODE PRO itself. Upon receipt, the entire exterior is covered with a disposable plastic seal to ensure the product is intact and new.
Removing all packaging reveals the product list: 1 EMODE PRO atomizer, 1 spare glass oil tank, 1 small screwdriver, 1 set of 6 spare rubber rings, 2 spare screws, 1 spare NC heating element, 1 pack of spare cotton pads, and one instruction manual and warning card, making for a very complete set of accessories that shows great sincerity.
The EMODE PRO has become more compact compared to its predecessor, the RFA, with overall dimensions well controlled, measuring 49.1mm in height and 28mm in diameter, weighing only 69 grams, making it easy to pair with various mod boxes.
【Appearance and Structure】
The main body of the EMODE PRO is made of stainless steel, with a matte spray finish, showcasing meticulous and solid craftsmanship. The engravings on the sides and top serve a decorative purpose without being overly flashy, maintaining OVALE's consistent rugged style.
OVALE's signature push-cap oil filling design is retained in the EMODE PRO. Simply push the top cover in the direction of the red arrow to reveal the oil filling hole, making it easy to refill e-liquid. From a practical experience perspective, I personally find this method to be the simplest and most user-friendly oil filling design available.
Additionally, the EMODE PRO adopts an upper airflow design, which means that the airflow holes are located above, and the area below the airflow holes is completely sealed as an oil tank design. When placed upright, there will be no leakage of e-liquid, which is the biggest advantage of the upper airflow structure.
Its disassembly structure consists of only four main components, making it very easy for newcomers to complete disassembly and cleaning tasks.
Let's take a closer look at its components. First, the drip tip is a fairly common design made of Teflon, providing good heat insulation. The internal structure features a reverse volcano design to reduce the interference of back condensation on flavor.
The top cover is designed as a one-piece unit, crafted from solid stainless steel. The front features an engraved seat style that is practical and elegant; the back reveals its internal airflow path as a double-layer tube, with the inner tube being the vapor tube and the outer tube being the airflow tube. This is a typical double-tube structure for top airflow designs. However, it is somewhat unique in that, unlike many top airflow designs that rely on small internal chambers for airflow, the EMODE PRO's tube diameter is larger, allowing for greater airflow adjustability and a wider range of flavor variations.
The side features a long airflow slot with dual opposing openings, allowing for a wide range of airflow adjustments, providing a variable airflow from very airy to extremely tight, while also offering a broad range of flavor variations.
The glass tank features a simple design with a 28mm diameter, providing a 5ml e-liquid capacity, and a spare piece is included in the packaging. Due to its straightforward design, the cost of replacing a broken glass tank is relatively low.
Finally, let's look at the innovative base design of the EMODE PRO. At first glance, it resembles a pre-made core screwed onto the base, but this protrusion is merely the chimney that connects to the top cover and cannot be unscrewed like an atomizer core. Overall, it is an integrated structure.
From the front view, you can see that there are four holes near the "chimney" for e-liquid wicking. The holes are not too large, making them suitable for e-liquids with good fluidity. Looking down the chimney, you can see the internal mesh heating element.
Its disassembly method is quite unique; you first unscrew the bottom cover, which initially puzzled me. Why not just unscrew the base directly? Why design it with two layers of covers?
The secret lies here: unscrewing the bottom cover reveals the internal locking mechanism. At the indicated gap in the image below, you can use your fingernail or tweezers to separate the base.
Once the base is separated, you can see that the RBA is very simple, consisting of a heating element fixed to the base with a screw and a ceramic base holding the cotton pad, together forming the RBA.
First, let's look at the heating element, which is defined by the manufacturer as an "NC ultra-long lifespan horizontal heating element," a patented technology exclusive to OVALE. The official parameters state that under the condition of 40W and heating 800 times a day, it can last over three months, meaning once installed, you won't need to touch it for three months, which is quite impressive. The fixed seat is also made of ceramic, providing excellent heat retention and enhancing flavor concentration.
The packaging also includes a spare heating element, so with two pieces, you can maintain over six months of lifespan. If the usage frequency is less than 800 times a day, the lifespan can be significantly extended. Whether the official parameters are accurate will take time to verify, but after several days of use, one thing is certain: it definitely lasts much longer than typical pre-made atomizer cores.
The rebuilding method is also very simple; just place the heating element on the base, align it with the holes on both sides, and screw in two screws. The entire process takes about 8 seconds, which is much simpler than the usual series of actions required for RBA rebuilding, such as winding wire, securing it, burning the wire, threading cotton, and debugging...
According to the manufacturer, the heating element should be replaced every three months. Now, regarding the more common cotton replacement operation, you simply need to place the pre-cut cotton pad on the ceramic base. The entire process takes just three seconds, which is also much simpler than the conventional RBA operations of threading and blowing cotton. The packaging includes a small bag of pre-cut cotton pads, providing a good user experience. Of course, using regular Muji cotton cut to size is also completely feasible.
Once the base is fully disassembled, for newcomers, questions like how many loops to wind the coil, how much cotton to use, and how to block the wicking holes can be complex and require multiple operations to master. Many new e-cigarette users have given up because they couldn't find a satisfying flavor, thinking that e-cigarettes are just like that. If all RBAs were as simple as the EMODE PRO, I believe user interest would be much easier to stimulate.
Reassembling the three components is straightforward; just snap and screw them together, requiring minimal manual skills to adapt and master.
【User Experience】
The EMODE PRO has a moderate size, with a diameter of 28mm slightly on the "chubby" side, but its shorter height makes it easy to pair with various mod boxes, whether dual-battery mods or single-battery portable boxes, as long as they have a standard 510 interface, compatibility is quite good.
In terms of flavor, thanks to its wide upper airflow, the flavor can range from very airy to extremely tight, providing a broad range of flavor adjustment options. As a tank atomizer, I prefer to adjust the airflow to about 1/5 or even fully closed, which brings a rich flavor that can rival the intensity of Five Chess. Overall, the experience is quite satisfying. Of course, with the airflow fully open, the lung hit experience is also good, with vapor production comparable to a single-coil RDA being no problem.
The built-in heating element stabilizes at around 0.3Ω after heating, providing excellent vapor performance at 40W, and the richness of the mouth-to-lung experience is commendable. With a 5ml e-liquid capacity, you won't need to refill frequently throughout the day.
In terms of lifespan, after testing, a single cotton pad showed only slight flavor changes after three to four tanks of e-liquid, with minimal carbon buildup (of course, this is also related to the low-sweetness e-liquid I used), indicating that cotton replacement doesn't need to be overly frequent. For users who are particular about flavor, I recommend replacing it every four to five tanks. After a week of use, the heating element showed no significant signs of aging, suggesting that the manufacturer's claim of a three-month lifespan for the heating element is quite reliable.
A few issues discovered during practical use that users should note:
1. Do not use overly viscous e-liquids; it is recommended that the VG ratio not exceed 70%, as it may affect wicking.
2. New atomizers must have e-liquid dripped onto the cotton before assembly to ensure proper saturation; adding e-liquid directly into the tank may not saturate the cotton due to surface tension, leading to burning.
3. New heating elements should be heated a few times after saturating the cotton and left to sit. Make sure to unscrew the atomizer from the mod and reattach it to the mod to re-recognize the resistance; otherwise, the new heating element may show resistance jumps. This operation is similar to the initial burn-in for new coils and should only be done once; afterward, it stabilizes. The stable resistance is around 0.3Ω (the new heating element's resistance is about 0.2Ω).
4. Avoid dry burning the heating element, as it may affect its lifespan.
5. Regular Muji cotton can be cut and used without needing to use the original cotton pads.
【Conclusion】
After more than a week of testing, the EMODE PRO atomizer has left a very deep impression on me. It offers an incredibly user-friendly rebuilding process, significantly reducing the cost of atomizer consumables while still providing excellent flavor and vapor performance. With a 5ml e-liquid capacity, its overall performance is quite impressive. I can responsibly say that it is currently the best rebuildable atomizer I have used, and I highly recommend it!
OVALE has been striving to break through the usability bottleneck in RBA optimization. This summer, they launched the EMODE RFA, which amazed users with its simple rebuilding method. Half a year later, OVALE has introduced a new product that further simplifies the rebuilding process based on the EMODE RFA, taking RBA usability to another level.
The EMODE PRO retains OVALE's signature push-cap oil filling system and adopts a reliable upper airflow structure that minimizes the risk of leakage. Its most innovative feature is the NC heating element packed with cutting-edge technology, allowing for quick replacement of the rebuildable core with just two screws, with a single piece lasting over three months. The oil-wicking cotton does not need to be threaded through the coil; it simply needs to be laid flat on the ceramic base, allowing for a replacement operation in just three seconds. Regular use only requires periodic cotton replacement.
This innovative and technologically advanced atomizer has piqued my interest. Join me as we delve into today's EMODE PRO atomizer review with equa!
【Packaging and Parameter Testing】
The EMODE PRO comes in a very intuitive crystal-clear box packaging, allowing a direct view of the EMODE PRO itself. Upon receipt, the entire exterior is covered with a disposable plastic seal to ensure the product is intact and new.
Removing all packaging reveals the product list: 1 EMODE PRO atomizer, 1 spare glass oil tank, 1 small screwdriver, 1 set of 6 spare rubber rings, 2 spare screws, 1 spare NC heating element, 1 pack of spare cotton pads, and one instruction manual and warning card, making for a very complete set of accessories that shows great sincerity.The EMODE PRO has become more compact compared to its predecessor, the RFA, with overall dimensions well controlled, measuring 49.1mm in height and 28mm in diameter, weighing only 69 grams, making it easy to pair with various mod boxes.
【Appearance and Structure】
The main body of the EMODE PRO is made of stainless steel, with a matte spray finish, showcasing meticulous and solid craftsmanship. The engravings on the sides and top serve a decorative purpose without being overly flashy, maintaining OVALE's consistent rugged style.
OVALE's signature push-cap oil filling design is retained in the EMODE PRO. Simply push the top cover in the direction of the red arrow to reveal the oil filling hole, making it easy to refill e-liquid. From a practical experience perspective, I personally find this method to be the simplest and most user-friendly oil filling design available.
Additionally, the EMODE PRO adopts an upper airflow design, which means that the airflow holes are located above, and the area below the airflow holes is completely sealed as an oil tank design. When placed upright, there will be no leakage of e-liquid, which is the biggest advantage of the upper airflow structure.
Its disassembly structure consists of only four main components, making it very easy for newcomers to complete disassembly and cleaning tasks.
Let's take a closer look at its components. First, the drip tip is a fairly common design made of Teflon, providing good heat insulation. The internal structure features a reverse volcano design to reduce the interference of back condensation on flavor.
The top cover is designed as a one-piece unit, crafted from solid stainless steel. The front features an engraved seat style that is practical and elegant; the back reveals its internal airflow path as a double-layer tube, with the inner tube being the vapor tube and the outer tube being the airflow tube. This is a typical double-tube structure for top airflow designs. However, it is somewhat unique in that, unlike many top airflow designs that rely on small internal chambers for airflow, the EMODE PRO's tube diameter is larger, allowing for greater airflow adjustability and a wider range of flavor variations.The side features a long airflow slot with dual opposing openings, allowing for a wide range of airflow adjustments, providing a variable airflow from very airy to extremely tight, while also offering a broad range of flavor variations.
The glass tank features a simple design with a 28mm diameter, providing a 5ml e-liquid capacity, and a spare piece is included in the packaging. Due to its straightforward design, the cost of replacing a broken glass tank is relatively low.
Finally, let's look at the innovative base design of the EMODE PRO. At first glance, it resembles a pre-made core screwed onto the base, but this protrusion is merely the chimney that connects to the top cover and cannot be unscrewed like an atomizer core. Overall, it is an integrated structure.
From the front view, you can see that there are four holes near the "chimney" for e-liquid wicking. The holes are not too large, making them suitable for e-liquids with good fluidity. Looking down the chimney, you can see the internal mesh heating element.
Its disassembly method is quite unique; you first unscrew the bottom cover, which initially puzzled me. Why not just unscrew the base directly? Why design it with two layers of covers?
The secret lies here: unscrewing the bottom cover reveals the internal locking mechanism. At the indicated gap in the image below, you can use your fingernail or tweezers to separate the base.
Once the base is separated, you can see that the RBA is very simple, consisting of a heating element fixed to the base with a screw and a ceramic base holding the cotton pad, together forming the RBA.
First, let's look at the heating element, which is defined by the manufacturer as an "NC ultra-long lifespan horizontal heating element," a patented technology exclusive to OVALE. The official parameters state that under the condition of 40W and heating 800 times a day, it can last over three months, meaning once installed, you won't need to touch it for three months, which is quite impressive. The fixed seat is also made of ceramic, providing excellent heat retention and enhancing flavor concentration.
The packaging also includes a spare heating element, so with two pieces, you can maintain over six months of lifespan. If the usage frequency is less than 800 times a day, the lifespan can be significantly extended. Whether the official parameters are accurate will take time to verify, but after several days of use, one thing is certain: it definitely lasts much longer than typical pre-made atomizer cores.
The rebuilding method is also very simple; just place the heating element on the base, align it with the holes on both sides, and screw in two screws. The entire process takes about 8 seconds, which is much simpler than the usual series of actions required for RBA rebuilding, such as winding wire, securing it, burning the wire, threading cotton, and debugging...
According to the manufacturer, the heating element should be replaced every three months. Now, regarding the more common cotton replacement operation, you simply need to place the pre-cut cotton pad on the ceramic base. The entire process takes just three seconds, which is also much simpler than the conventional RBA operations of threading and blowing cotton. The packaging includes a small bag of pre-cut cotton pads, providing a good user experience. Of course, using regular Muji cotton cut to size is also completely feasible.
Once the base is fully disassembled, for newcomers, questions like how many loops to wind the coil, how much cotton to use, and how to block the wicking holes can be complex and require multiple operations to master. Many new e-cigarette users have given up because they couldn't find a satisfying flavor, thinking that e-cigarettes are just like that. If all RBAs were as simple as the EMODE PRO, I believe user interest would be much easier to stimulate.Reassembling the three components is straightforward; just snap and screw them together, requiring minimal manual skills to adapt and master.
【User Experience】
The EMODE PRO has a moderate size, with a diameter of 28mm slightly on the "chubby" side, but its shorter height makes it easy to pair with various mod boxes, whether dual-battery mods or single-battery portable boxes, as long as they have a standard 510 interface, compatibility is quite good.
In terms of flavor, thanks to its wide upper airflow, the flavor can range from very airy to extremely tight, providing a broad range of flavor adjustment options. As a tank atomizer, I prefer to adjust the airflow to about 1/5 or even fully closed, which brings a rich flavor that can rival the intensity of Five Chess. Overall, the experience is quite satisfying. Of course, with the airflow fully open, the lung hit experience is also good, with vapor production comparable to a single-coil RDA being no problem.
The built-in heating element stabilizes at around 0.3Ω after heating, providing excellent vapor performance at 40W, and the richness of the mouth-to-lung experience is commendable. With a 5ml e-liquid capacity, you won't need to refill frequently throughout the day.
In terms of lifespan, after testing, a single cotton pad showed only slight flavor changes after three to four tanks of e-liquid, with minimal carbon buildup (of course, this is also related to the low-sweetness e-liquid I used), indicating that cotton replacement doesn't need to be overly frequent. For users who are particular about flavor, I recommend replacing it every four to five tanks. After a week of use, the heating element showed no significant signs of aging, suggesting that the manufacturer's claim of a three-month lifespan for the heating element is quite reliable.
A few issues discovered during practical use that users should note:
1. Do not use overly viscous e-liquids; it is recommended that the VG ratio not exceed 70%, as it may affect wicking.
2. New atomizers must have e-liquid dripped onto the cotton before assembly to ensure proper saturation; adding e-liquid directly into the tank may not saturate the cotton due to surface tension, leading to burning.
3. New heating elements should be heated a few times after saturating the cotton and left to sit. Make sure to unscrew the atomizer from the mod and reattach it to the mod to re-recognize the resistance; otherwise, the new heating element may show resistance jumps. This operation is similar to the initial burn-in for new coils and should only be done once; afterward, it stabilizes. The stable resistance is around 0.3Ω (the new heating element's resistance is about 0.2Ω).
4. Avoid dry burning the heating element, as it may affect its lifespan.
5. Regular Muji cotton can be cut and used without needing to use the original cotton pads.
【Conclusion】
After more than a week of testing, the EMODE PRO atomizer has left a very deep impression on me. It offers an incredibly user-friendly rebuilding process, significantly reducing the cost of atomizer consumables while still providing excellent flavor and vapor performance. With a 5ml e-liquid capacity, its overall performance is quite impressive. I can responsibly say that it is currently the best rebuildable atomizer I have used, and I highly recommend it!
