What Wattage Should Be Set for a General Prefabricated 1.2-Ohm Coil?

 　　I looked it up online and asked some sellers, and they all said a 1.2-ohm coil should not be set above 20W. But when I use 20W, I can barely get any vapor out. I have to hold the button for a long time before it starts producing vapor. I noticed the bottom of the coil says 120W max, so I tried vaping it at 60W, and it worked normally.

  　　So I’d like to ask: am I using it correctly? Are there any risks or hidden dangers?   　　I’m new to this, so I’d really appreciate any advice from the experts. Thank you.   　　For 1.2Ω, 10-18W is considered normal. Something seems off with yours. If possible, post a photo of the display screen so we can take a look.   　　This is some kind of special high-tech coil, and some devices don’t support it. It should be fine to raise the wattage a bit.   　　It seems this coil really does have some special tech, so you can use it at a higher setting. For the specifics, though, you’d still need to ask people who have actually used it.   　　Well, if the coil itself says it can be used within the recommended range, then just use it accordingly. I haven’t paid much attention to prebuilt coils, but last time I even saw one that claimed it could go up to 200W. I was pretty skeptical, though apparently this kind of thing has existed for a while, just maybe not quite that high.   　　Go ahead and use it, don’t worry. It should be fine. I have this atomizer too, but I’ve always used the 0.5-ohm coil at around 40W.   　　The coil has a suggested wattage range. I’m guessing you got the high-vapor coil, so following the recommended value on the coil should be fine.