Common Vape Atomizer DIY Data Sharing

 　　Basic data can ensure that the atomizer can perform some necessary functions, preventing a poor experience, but specific data still relies on personal exploration. The following is just a rough outline.

  　　Oil Reservoir Mouth-to-Lung Atomizers   　　Mouth-to-lung atomizers have a noticeable draw resistance, similar to the sensation of inhaling a cigarette.   　　Models like KF series, BF99 V2, Typhoon series, Rose series, etc., have smaller atomization chambers and air inlets, so they are not suitable for aggressive heating wires; otherwise, it may lead to counterproductive results. It is recommended to use 28GA/0.32mm or 26GA/0.4mm specifications, with materials typically being NI80 or A1 wire, generally 6-8 wraps, with a diameter of about 2.5mm, and the winding method is usually tight.   　　Single Coil Direct Lung Atomizers   　　Direct lung atomizers allow for a smooth deep inhalation.   　　Models like Mage GTA, Mini Snake, Insider atomizer, CP atomizer, etc., have medium atomization chambers and a wide range of adjustable airflow, suitable for aggressive heating wires; otherwise, if the airflow is too large, the cooling effect will be too good, causing slow heating wires to fail to provide rich vapor. It is recommended to use 24GA/0.5mm or 22GA/0.6mm specifications, with materials typically being NI80, generally 6-8 wraps, with a diameter of about 3.0mm, and the winding method is usually tight. Alternatively, you can choose dual-core Clapton, triple-core Clapton, dual-core staggered Clapton, etc.   　　Dual Coil Direct Lung Atomizers   　　These atomizers provide two coil spaces, with impressive oil consumption and excellent flavor performance.   　　Models like Vogd, Avocado atomizer, Smiley atomizer, Petri, Merlin, etc., have larger atomization chambers and a very wide range of airflow adjustment, suitable for aggressive wires; otherwise, it may lead to similar situations as single coil direct lung atomizers. It is recommended to use 24GA/0.5mm or 22GA/0.6mm specifications, with materials typically being NI80, generally 6-8 wraps, with a diameter of about 3.0mm, and the winding method is usually tight, then install two cores in the atomizer. Alternatively, you can choose dual-core Clapton, triple-core Clapton, quadruple-core Clapton, dual-core staggered Clapton, etc.   　　22mm Single Coil Dripping Atomizers   　　Models like Narda, Narca, AX1, Hadaly v1, Mini Bumblebee, etc. Although these are dripping atomizers, the overall atomization chamber space is not large, so exaggerated wires cannot be used. It is recommended to use 24GA/0.5mm specifications, with materials typically being NI80, generally 6-8 wraps, with a diameter of about 3.0mm, and the winding method is usually tight. Alternatively, you can choose dual-core Clapton.   　　22mm Dual Coil Dripping Atomizers   　　Models like Hobo 3.1, Hobo 4.0, O-Atty, etc., are small-sized 22mm dual coil drippers. It is recommended to use 24GA/0.5mm specifications, with materials typically being NI80, generally 6-8 wraps, with a diameter of about 2.5mm, with some using 3.0mm, and the winding method is usually tight. There is no need to pursue fancy wires. The amount of vapor produced by dual coils in such airflow is sufficient, and there is no need to forcefully increase the heating capacity of the wire.   　　24mm Dual Coil Dripping Atomizers   　　Models like Doge, 528, Kennedy, Hellvape, Zero, Scorpion, etc. These atomizers have large chambers, and if not utilized, it would be a waste. It is recommended to use 24GA/0.5mm or 22GA/0.6mm specifications, with materials typically being NI80, generally 6-8 wraps, with a diameter of about 3.0mm, and the winding method is usually tight, with the choice of basic wire being similar to that of dual coil direct lung atomizers. The selection of fancy wires is broader; as long as they can be installed, they can be tried. Exaggerated airflow and excellent cooling can support the player's creativity.